Filter
Top Products
Appendix: Greeter Module
3M™ Drive-Thru Systems Model G5 and Model XT-1
Operating Instructions
November 6 2014 – Revision 2.1
Page 71 of 77
a)
Message Activation
b) Record Messages
c) Message Daypart Definitions
d) Greeter Message Properties
e)
Message Names
All menus are the same, with the exception of Greeter Message Properties,
adding the Tandem Pull Forward message setting.
:GREETER MESSAGE PROPERTIES:
External Detector Playback Message>OFF<
Tandem Pull Ahead Playback Message>OFF<
Greeter Revision <03>
Tandem Pull Ahead Playback Message
You can assign a custom message to be played to customers at the Lane 2 order
point when the Lane 1 order point is available to pull forward. The custom
message must be recorded as Type FORWARD.
To select which pull ahead playback message is chosen:
1.
Navigate to
Tandem Pull Ahead Playback Message
.
2.
Change the value of the playback setting. Your choices are:
•
OFF
- The factory provided “Pull Forward” message is used.
•
ON
- The custom recorded FORWARD message is used.
Greeter Setup (For Systems with V2, V3, or V4 Base Station software)
Refer to Manual Version 1.6 for instruction on operating the Greeter Module
with Base Station software V2, V3, or V4.