Filter
Top Products
49
English
AUTOMATIC TUNING
1. Select “TUNER” as the input source.
2. Select the reception band (FM or AM) confirming it on the
display panel.
3. If
“AUTO TUNING” is not illuminated on the display panel, press once
so that it lights up.
4. Begin the automatic tuning search.
To tune to a higher frequency, press the right side once.
To tune to a lower frequency, press the left side once.
• If the station where tuning search stops is not the desired one,
press again.
• If the tuning search does not stop at the desired station
(because the signals of the station are weak), change to the
MANUAL TUNING method.
MANUAL TUNING
1. Select “TUNER” as the input source.
2. Select the reception band (FM or AM) confirming it on the
display panel.
3. If
“AUTO TUNING” is illuminated on the display panel, press once so
that it goes off.
4. Tune to a desired station manually.
To continue tuning search, press and hold the button.
NOTE
If you tune to an FM station manually, it is received in monaural
mode automatically to increase the signal quality.
TUNING OPERATIONS
Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) is possible.
However, if signals of the station you want to select are weak, you must tune to it manually (MANUAL TUNING).
FM AM
or
or
FM AM
or
or
DOWN
TUNING
UP
AUTO TUNING
TUNING
MODE
AUTO
/
MAN’L MONO
DOWN
TUNING
UP
Front panel
Front panel
Front panel
Front panel
Front panel
Front panel
FM
/
AM
FM
/
AM
TUNING
MODE
AUTO
/
MAN’L MONO
Front panel
TUNER PHONO
Remote control
TUNER
Front panel
TUNER PHONO
Remote control
TUNER
or
or