Yamaha RX-V992 Stereo System User Manual


 
46
Notes on using the input selector buttons
Note that pressing on each input selector button selects the
source which is connected to the corresponding input terminals
on the rear panel.
* To select the source connected to the VIDEO AUX terminals
on the front panel, press VIDEO AUX.
Once you play a video source, its video image will not be
interrupted even if the input selector button for an audio source
is selected.
When you select an input source by pressing the
corresponding input selector button, the DSP program (or the
state of no DSP program is used) which was used when the
same input source was selected the last time will automatically
recalled.
Switching the input mode (for DVD/LD and
TV/DBS)
This unit allows you to switch the input mode only for sources
connected to the DVD/LD and TV/DBS input jacks (on the rear of this
unit) that input two or three types of signals to this unit.
The following two input modes are provided.
AUTO: For the source connected to the DVD/LD input jacks:
This mode is automatically selected when you turn on the
power of this unit. In this mode, input signal is
automatically selected by the following order of priority.
1.Digital input signal from the OPTICAL jack
2.Digital input signal from the COAXIAL jack
3.Analog input signal
For the source connected to the TV/DBS input jacks:
This mode is automatically selected when you turn on the
power of this unit if the “AUTO” position is selected on “8.
INPUT MODE” in the SET MENU mode. (See page 44 for
details.) In this mode, input signal is automatically selected
by the following order of priority.
1.Digital input signal from the COAXIAL jack
2.Analog input signal
ANALOG:
In this mode, only analog input signal is selected even
though digital signal is input at the same time.
Select this mode when you want to use the analog input
signal instead of the digital input signal.
NOTE: For the TV/DBS source only, the input mode selected on the
function “8. INPUT MODE” in the SET MENU mode is selected when
you turn on the power of this unit.