Filter
Top Products
83
English
ZONE 2/ZONE 3 (U.S.A., CANADA, U.K., EUROPE AND AUSTRALIA MODELS ONLY)
ADVANCED
OPERATION
3 Press an input selector button to select the
input source you want to listen to in the
second/third room.
The display window shows “2: name of selected
input” or “3: name of selected input” if the remote
control is in the Zone 2/Zone 3 mode.
Signals input to V-AUX and PHONO jacks cannot be sent to
Zone 2/Zone 3.
4 You can control the unit from Zone 2 or Zone
3 by using the input selector, STANDBY,
SYSTEM POWER, MUTE and VOLUME +/–
buttons.
* VOLUME +/– can be used only when Zone2 Volume or
Zone3 Volume is set to “Variable” in the GUI menu (see
page 66).
5 Press SELECT k / n to exit from the Zone 2/
Zone 3 mode.
• The source in Zone 2 and the source available for recording are
always the same.
• “ZONE2” or “ZONE3” will appear in the display window only
when k is pressed, and “SYSTM” only when n is pressed
■ Turning this unit to either on or standby
SYSTEM POWER and STANDBY work differently
depending on the selected mode that appears on the
display window.
• When normal, Zone 2 or Zone 3 mode is selected, you
can turn the main unit, Zone 2 or Zone 3 to on/standby
individually.
• When System mode is selected, or when “2000” or
“2002” (see page 71) is selected as the amplifier library
(L:AMP) code, you can turn the main unit, Zone 2 and
Zone 3 to on/standby simultaneously.
*
“MAIN” appears for a few seconds when SYSTEM POWER
or STANDBY is pressed.
■ Special considerations for DTS software
The DTS signal is a digital bitstream. If you attempt to
send the DTS signal to the second/third room you will
only hear digital noise (that may damage your speakers).
Thus, the following considerations and adjustments need
to be made when playing DTS encoded discs.
For DVDs encoded with DTS
Only 2 channel analog audio signals may be sent to the
second/third room.
Use the disc menu to set the DVD player’s mixed 2-
channel left and right audio outputs to the PCM or Dolby
Digital soundtrack.
For CDs encoded in DTS
To avoid unexpected noise, DO NOT USE the Zone 2/
Zone 3 feature with CDs encoded in DTS.
Note
Notes
DTV DVR/VCR2VCR 1 DVD
V
-
AUX
CBL/SAT MD/TAPE
CD-R
PHONO TUNER CD
MULTI CH IN
SLEEP
INPUT MODE
A
B
DTV DVR/VCR2VCR 1 DVD
V
-
AUX
CBL/SAT MD/TAPE
CD-R
PHONO TUNER CD
MULTI CH IN
POWER POWER POWER
SYSTEM
STANDBY
AVTV
SLEEP
INPUT MODE
A
B
EXIT
TOP
MENU
PURE DIRECT
TITLE
A/B/C/D/E
SELECT
VOL
+
–
CH
+
–
TV VOL
TV MUTE TV INPUT
MUTE
+
–
AMP
SOURCE
TV
*
LCD display
SYSTEM POWER/
STANDBY
Normal mode
*
Name of component
Turns the main unit
on/standby
Zone 2 mode
“Zone2” or “2:name of
component”
Turns Zone 2 to on/
standby
Zone 3 mode
“Zone3” or “3:name of
component”
Turns Zone 3 to on/
standby
System mode
“SYSTM”
Turns everything (the
main unit, Zone 2,
Zone 3) on/standby