Filter
Top Products
SYSTEM OPTIONS
53
English
ADVANCED
OPERATION
You can use the following parameters to adjust a variety of system settings and customize the way this unit operates.
Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment.
■ Stereo/Surround (Stereo/Surround)
Use to edit sound field parameters (see page 89).
■ Input Select (Input select)
Use to reassign digital input/outputs, select the input signal, rename the inputs, or adjust the output volume of each jack.
■ Manual Setup (Manual setup)
Use to manually adjust speaker and system settings.
Sound (Sound)
Use to manually adjust the sound parameters.
Basic (Basic)
Use to quickly setup basic system parameters.
SYSTEM OPTIONS
Item Features Page
I/O Assignment Assigns jacks according to the component to be used.
56
Volume Trim Adjusts the output volume of each jack.
56
Rename Changes the name of the input.
57
Multi CH Assign Selects the number of audio channels input through the MULTI CH INPUT jacks
57
Item Features Page
LFE Level Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.
58
Dynamic Range Adjusts the dynamic range for Dolby Digital or DTS signals.
58
Parametric EQ Adjusts the tonal quality of each speaker.
59
Tone Control Adjusts the tonal balance of the speakers and headphones.
59
Audio Option Customizes overall audio settings for this unit.
60
Item Features Page
Test Tone Turns the test tone output on or off for Speaker Set, Speaker Distance and Speaker Level settings.
61
Speaker Set
Selects the output mode suitable for each speaker, the speakers for low-frequency signal output,
and the cross over frequency.
61
Speaker Distance Adjusts the delay time of each speaker.
64
Speaker Level Adjusts the output level of each speaker.
64