Filter
Top Products
71
English
REMOTE CONTROL FEATURES
ADVANCED
OPERATION
3 Press and hold LEARN for about 3 seconds
using a ballpoint pen or similar object.
The library name (ex. “L:DVD”) and the selected
component name (ex. “DVD”) appear alternately in
the display window.
y
If you want to setup for another component, press the input
selector button or SELECT k / n to select the component.
• Be sure to press and hold LEARN for at least 3 seconds,
otherwise the learning process will start.
• If you do not complete each of the following steps within
30 seconds, the setting mode will be automatically
canceled. In this case, press LEARN again.
If you want to change a library (component
category), press l / h. You can set a
different type of component.
Library choices: L:DVD, L:DVR, L:LD, L:CD,
L:CDR, L:MD, L:TAP (tape), L:TUN (tuner),
L:AMP
*
, L:TV, L:CAB (cable), L:SAT (satellite),
L:VCR
* The amplifier library (L:AMP) code is preset to “2000” in
order to operate this unit. However, you can switch by
entering one of the following 4 codes if necessary.
When using multiple YAMAHA receivers/amplifiers, you
may be able to operate the other components simultaneously
with the default code setting. In this case, set one of the
alternative codes to operate this unit separately.
4 Press ENTER.
The four-digit code set for the selected component
appears in the display window.
“0000” appears in the display window if no code has been
set.
5 Press the numeric buttons to enter the four-
digit remote control code for the component
you want to use.
For a complete list of available remote control codes,
refer to “LIST OF REMOTE CONTROL CODES” at
the end of this manual.
Notes
LEARN
AMP library
code
(remote
control
setting)
Function
Remote
control ID
(this unit’s
setting:
see
page 84)
2000
(initial setting)
To operate this unit using the
default code.
ID1
(initial
setting)
2001
To operate this unit using the
default code.
To operate Zone 2 or Zone 3
features (see page 81).
(U.S.A., Canada, U.K.,
Europe and Australia models
only)
2002
To operate this unit using an
alternative code.
ID2
2003
To operate this unit using an
alternative code.
To operate Zone 2 or Zone 3
features of other YAMAHA
receivers/amplifiers (see
page 81).
Note
3421
90
+10
ENT.
5678
1
2B
THX
STANDARD SELECT EXTD. SUR
STEREO
MUSIC ENTERTAIN MOVIE
A
SPEAKERSMEMORY