Filter
Top Products
66
SYSTEM OPTIONS
■ Multi Zone (Multi zone)
Use this feature to customize the Zone 2 and Zone B
settings.
Manual Setup > Option > Multi Zone >
Speaker B (Speaker B)
Use this feature to select the location of the front speakers
connected to the SPEAKERS B terminals.
Choices: Main, ZoneB
• Select “Main” to turn on/off SPEAKERS A and B
when the speakers connected to the SPEAKERS B
terminals are set in the main room.
• Select “ZoneB” if the speakers connected to the
SPEAKERS B terminals are set in another room. If
SPEAKERS A is turned off and SPEAKERS B is
turned on, all the speakers including the subwoofer in
the main room are muted and the unit outputs sound
from SPEAKERS B only.
• If you select “Zone B” and connect headphones to the PHONES
jack on this unit, the sound is output from both the headphones
and SPEAKERS B.
• When a DSP program is selected, the unit automatically enters
the Virtual CINEMA DSP mode.
Zone2 Amplifier (Zone 2 amplifier)
Use to select how the ZONE 2 speakers are amplified.
Choices: Internal, External, None
• Select “External” if you connect your Zone 2 speakers
through an external amplifier connected to this unit’s
ZONE 2 OUTPUT jacks.
• Select “Internal” to use this unit’s internal amplifier if
you connect your Zone 2 speakers directly to this unit’s
PRESENCE/ZONE 2 speaker terminals.
• Select “None” if you do not want to use the Zone2
feature.
• When “Internal” is selected, the presence speaker setting
automatically switches to “None”.
• When “Internal” is selected, the Zone2 volume setting
automatically switches to “Variable”.
Zone2 Volume (Zone 2 volume)
Use to select how the volume control will operate with
regard to the ZONE 2 OUTPUT jacks. When Zone2
Amplifier is set to “Internal”, this feature is automatically
set to “Variable”.
Choices: Fixed, Variable
• Select “Fixed” to fix the ZONE 2 OUTPUT volume
level to a standard line level.
• Select “Variable” to adjust the ZONE 2 OUTPUT
volume simultaneously using VOL +/– on the remote
control.
Zone3 Volume (Zone 3 volume)
Use to select how the volume control will operate with
regard to the ZONE 3 OUTPUT jacks.
Choices: Fixed, Variable
• Select “Fixed” to fix the ZONE 3 OUTPUT volume
level to a standard line level.
• Select “Variable” to adjust the ZONE 3 OUTPUT
volume simultaneously using VOL +/– on the remote
control.
y
This menu item is also available in the front panel display system
options menu (see page 85).
■ Surr.Initialize (Surround initialize)
Use this feature to initialize the parameters for each sound
field program within sound field program groups. When
you initialize a sound field program group, all of the
parameter values within that group revert to their initial
settings.
Adjusted sound field parameter settings are displayed in
blue.
Manual Setup > Option > Surr.Initialize
Choices: STEREO, MUSIC, ENTERTAINMENT,
MOVIE THEATER, SURROUND, All
•Press k / n to select the sound field program you want
to initialize, then press ENTER.
• Select “All” to initialize settings for all sound field
program parameters.
y
This menu item is also available in the front panel display system
options menu (see page 85).
Sound field program groups cannot be initialized when Memory
Guard is set to “Guard” (see page 67).
Notes
Notes
Display
Surr.Initialize
Input Mode
Multi Zone
Zone2 Amplifier
Zone2 Volume
Speaker B
Zone 3 Volume
Note
Multi Zone
Display
STEREO
MUSIC
ENTERTAINMENT
MOVIE THEATER
SURROUND
All
Input Mode
Memory Guard
Surr.Initialize