Filter
Top Products
59
English
SYSTEM OPTIONS
ADVANCED
OPERATION
■ Parametric EQ (Parametric equalizer)
Use this feature to adjust the PEQ for any speaker.
1 Press k / n to select Test Tone or the speaker
you want to adjust.
• Test Tone turns on or off the test tone output
when adjusting the tonal quality of each speaker.
• Front L adjusts the tonal quality of the front left
speaker.
• Front R adjusts the tonal quality of the front right
speaker.
• Center adjusts the tonal quality of the center
speaker.
• Surround L adjusts the tonal quality of the
surround left speaker.
• Surround R adjusts the tonal quality of the
surround right speaker.
• Surround Back L adjusts the tonal quality of the
surround back left speaker.
• Surround Back R adjusts the tonal quality of the
surround back right speaker.
• Presence L adjusts the tonal quality of the
presence left speaker.
• Presence R adjusts the tonal quality of the
presence right speaker.
2 Press h to access the settings window.
3 Press l / h to select PARAM, then press
ENTER to select a parameter from Band
(band), Freq (frequency) or Q (Q factor).
4 Press n EDIT and press ENTER to access the
edit window.
The parameter selected in PARAM is highlighted.
•Press l / h to adjust the parameter.
•Press k / n to adjust the Gain.
• Press ENTER to exit the edit window.
5 Repeat steps 3 and 4 until you are satisfied
with the results.
y
If you want to reset all PEQ parameter settings for the
selected speaker, select RESET and press ENTER.
6 Select EXIT and press ENTER to exit the
settings window.
y
• If you select “Band” in step 3, you can use this menu as a
graphic equalizer.
• For more information on the parametric equalizer, see
“PARAMETRIC EQUALIZER INFORMATION” on page 104.
■ Tone Control (Tone control)
Use to adjust the amount of bass and treble output to your
speakers and headphones.
Manual Setup > Sound > Tone Control >
Control (Tone control)
Choices: Defeat, Speaker, Headphone
• Select “Defeat” if you do not want to make any
adjustments.
• Select “Speaker” to adjust the bass/treble balance of
your speakers.
• Select “Headphone” to adjust the bass/treble balance of
your headphones.
Front L
Front R
Test Tone
Dynamic Range
LFE Level
Tone Control
Audio Option
Parametric EQ
Front L
Band / Gain
PARAM RESET
EDIT EXIT
Front R
Center
Test Tone
Front L
Q
Freq.
Gain
Band
1.000
125.0Hz
0.0dB
#1
Front R
Center
Test Tone
Speaker
Headphone
Defeat
Bass
Treble
Control