Filter
Top Products
27
English
AUTO SETUP
PREPARATION
For best results, make sure the room is as quiet as possible
during the auto setup procedure (YPAO). If there is too
much ambient noise, the results may not be satisfactory.
y
If your subwoofer can adjust the output volume and the crossover
frequency, set the volume to about half way (or slightly less) and
set the crossover frequency to the maximum.
1 Switch on this unit and video monitor.
2 Set AMP/SOURCE/TV to AMP, then press
TOP on the remote control.
The top display appears.
3 Press k / n repeatedly to select Auto Setup,
then press h.
4 Press k / n repeatedly to select Setup Menu,
then press h.
5 Press k / n repeatedly to select Wiring,
Distance, Size, Equalizing or Level, then
press h.
6 For Wiring, Distance, Size or Level, select:
Check To automatically check and adjust the selected
item.
Skip To skip the selected item and perform no
adjustments.
y
When using THX speakers, select Skip for Size and make
sure that “Small” or “Small x2” is selected in Speaker Set
(page 61) and that “80Hz (THX)” is selected in Bass Cross
Over (page 63).
Starting the setup
CROSSOVER/
HIGH CUT
MIN
MAX
Subwoofer
VOLUME
MIN
MAX
TOP
TITLE
Sound
Option
Basic
Manual Setup
Auto Setup
System Memory
Input Select
Stereo/Surround
AMP
SOURCE
TV
ENTER
ENTER
Information
Setup Type
Start
Setup Menu
Auto Setup
System Memory
Audio Info.
Manual Setup
Input Select
Setup Menu
Setup Type
Start
Wiring
Distance
Size
Information
Skip
Check
Wiring
Distance
Size
Skip
Check
Size
Equalizing
Level
Distance
Wiring
Skip
Check
Distance
Size
Equalizing
Wiring
Skip
Check: Natural
Check: Flat
Check: Front
Equalizing
Level
Size
Distance
Skip
Check
Level
Equalizing
Size