Filter
Top Products
80
MANUAL SETUP
■ Speaker level B)SP LEVEL
Use these settings to manually balance the speaker levels
between the front left (or surround left) speaker and each
speaker selected in SPEAKER SET (page 78).
Choices: –10.0 dB to +10.0 dB
Initial setting: 0.0 dB
• FR. L adjusts the balance of the front left speaker.
• FR. R adjusts the balance of the front right speaker.
• CENT. adjusts the balance of the center speaker.
• SUR. L adjusts the balance of the surround left
speaker.
• SUR. R adjusts the balance of the surround right
speaker.
• SB L adjusts the balance of the surround back left
speaker.
• SB R adjusts the balance of the surround back right
speaker.
• SB adjusts the balance of the surround back speakers.
• SWFR adjusts the balance of the subwoofer.
• PR. L adjusts the balance of the presence left speaker.
• PR. R adjusts the balance of the presence right
speaker.
y
If you use a handheld SPL meter, hold at arms length and point
upwards so that the meter is in the listening position. With the
meter set to the 70 dB scale and to C SLOW, calibrate each
speaker to 75 dB.
• CENT. cannot be adjusted if CENTER SP is set to NONE (see
page 78).
• SUR. L and SUR. R cannot be adjusted if SB L/R SP is set to
NONE (see page 79).
• SB L and SB R can be adjusted only if SB L/R SP is set to
either LRGx2 or SMLx2 (see page 79).
• SB can be adjusted only if SB L/R SP is set to either LRGx1 or
SMLx1 (see page 79).
• SWFR cannot be adjusted if LFE/BASS OUT is set to FRONT
(see page 78).
• PR. L and PR. R cannot be adjusted if PRESENCE SP is set to
NONE (see page 79).
■ Speaker distance C)SP DISTANCE
Use this feature to manually input the distance of each
speaker and adjust the delay applied to respective channel.
Ideally, each speaker should be the same distance from the
main listening position. However, this is not possible in
most home situations. Thus, a certain amount of delay
must be applied to the sound from each speaker so that all
sounds arrive at the listening position at the same time.
Unit UNIT
Choices: meters (m), feet (ft)
• Select meters to input speaker distances in meters.
• Select feet to input speaker distances in feet.
Speaker distances
Choices: 0.3 to 24.0 m (1.0 to 80.0 ft)
Initial setting: 3.0 m (10.0 ft)
• FRONT L adjusts the distance of the front left speaker.
• FRONT R adjusts the distance of the front right
speaker.
• CENTER adjusts the distance of the center speaker.
• SUR. L adjusts the distance of the surround left
speaker.
• SUR. R adjusts the distance of the surround right
speaker.
• SB L adjusts the distance of the surround back left
speaker.
• SB R adjusts the distance of the surround back right
speaker.
• SB adjusts the distance of the surround back speakers.
• SWFR adjusts the distance of the subwoofer.
• PRNS L adjusts the distance of the presence left
speaker.
• PRNS R adjusts the distance of the presence right
speaker.
• CENTER cannot be adjusted if CENTER SP is set to NONE
(see page 78).
• SUR. L and SUR. R cannot be adjusted if SB L/R SP is set to
NONE (see page 79).
• SB L and SB R can be adjusted only if SB L/R SP is set to
either LRGx2 or SMLx2 (see page 79).
• SB can be adjusted only if SB L/R SP is set to either LRGx1 or
SMLx1 (see page 79).
• SWFR cannot be adjusted if LFE/BASS OUT is set to FRONT
(see page 78).
• PRNS L and PRNS R cannot be adjusted if PRESENCE SP is
set to NONE (see page 79).
Notes
-+
. FR.L
FR.R
CENT.
B)SP
LEVEL
[]/[]:Up/Down
[<]/[>]:Adjust
p
p
Notes
. UNIT;;;;;;;;feet
FRONTL;;;10.0ft
FRONTR;;;10.0ft
CENTER;;;;10.0ft
C)SP
DISTANCE
[]/[]:Up/Down
[<]/[>]:Adjust
p
p