Filter
Top Products
79
MANUAL SETUP
ADVANCED
OPERATION
Surround back speakers SB L/R SP
Choices: LRGx2, LRGx1, SMLx2, SMLx1, NONE
• Select LRGx2 if you have 2 large surround back
speakers. The unit directs the entire range of the
surround back channel signal to the surround back
speakers.
• Select LRGx1 if you have a large surround back
speaker. The unit directs the entire range of the
surround back channel signal to the left surround back
speaker.
• Select SMLx2 if you have 2 small surround back
speakers. The low-frequency signals of the surround
back channels are directed to the speakers selected in
LFE/BASS OUT.
• Select SMLx1 if you have a small surround back
speaker. The low-frequency signals of the surround
back channel are directed to the speakers selected in
LFE/BASS OUT, and the rest of the frequency signals
are directed to the left surround back speaker.
• Select NONE if you do not have a surround back
speaker. The unit directs all of the surround back
channel signal to the surround left and right speakers.
• If you select LRGx1 or SMLx1, connect the speaker to the left
SURROUND BACK speaker terminals.
• NONE is automatically selected if BI-AMP is set to ON
(see page 91). This affects settings for SP LEVEL and SP
DISTANCE.
Presence speakers PRESENCE SP
Use this feature if you want to use the presence speakers
connected to this unit.
Choices: NONE, YES
• Select NONE if you do not have presence speakers.
• Select YES if you have presence speakers and want to
use them.
Bass cross over CROSS OVER
Use this feature to select a cross-over (cut-off) frequency
for all low-frequency signals. All frequencies below the
selected frequency will be sent to the subwoofer.
Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz,
120Hz, 160Hz, 200Hz
THX recommendation: 80Hz
Subwoofer phase SUBWOOFER PHASE
If bass sounds are lacking or unclear, use this feature to
adjust the frequency phase characteristics of your
subwoofer.
Choices: NORMAL, REVERSE
• Select NORMAL not to reverse the phase of your
subwoofer.
• Select REVERSE to reverse the phase of your
subwoofer.
Priority PRIORITY
Surround back and presence speakers do not output sound
simultaneously. You can select to prioritize either speaker
set when playing sources that contain surround back
channel signals using CINEMA DSP sound field
programs.
Choices: PRNS, SB
• Select PRNS to use presence speakers even when
surround back channel signals are input. The signals
for the surround back channel will be output from
surround speakers.
• Select SB to use surround back speakers when a
surround back channel signal is detected in a CINEMA
DSP program. Presence channel signals will be output
from front speakers.
Notes
SMLx1 [SMLx2
SB L/R SP
[NONE YES
PRESENCE SP
FREQ;;;80Hz(THX)
CROSS OVER
[NORMAL REVERSE
SUBWOOFER PHASE
PRNS [SB
PRIORITY