Yamaha RX-V1600 Stereo System User Manual


 
SPECIFICATIONS
121
ADDITIONAL
INFORMATION
AUDIO SECTION
Minimum RMS Output Power for Front, Center, Surround,
Surround back
20 Hz to 20 kHz, 0.04% THD, 8 .................................... 120 W
Dynamic Power (IHF)
8/6/4/2 ........................................................ 155/195/250/330 W
Maximum Power (EIAJ)
[Asia, General, China and Korea models]
1 kHz, 10% THD, 6 .........................................................170 W
Maximum Output Power [U.K. and Europe models]
1 kHz, 0.7% THD, 4 ........................................................170 W
Dynamic Headroom
8 .....................................................................................1.03 dB
IEC Output Power [U.K. and Europe models]
1 kHz, 0.04% THD, 8 ......................................................125 W
Damping Factor (IHF)
20 Hz to 20 kHz, 8 ..................................................140 or more
Input Sensitivity/Input Impedance
PHONO .................................................................. 3.5 mV/47 k
CD, etc. ................................................................. 200 mV/47 k
MULTI CH INPUT ............................................... 200 mV/47 k
Maximum Input Signal
PHONO (1 kHz, 0.1% THD) ................................ 60 mV or more
CD, etc. (1 kHz, 0.5% THD) .................................. 2.4 V or more
Output Level/Output Impedance
OUT (REC) .......................................................... 200 mV/1.2 k
PRE OUT ................................................................... 1.0 V/500
SUBWOOFER ........................................................... 2.0 V/500
ZONE 2/ZONE 3 OUT
[U.S.A., Canada, Australia, U.K. and Europe models]
................................................................................ 1.0 V/1.2 k
Headphone Jack Rated Output/Impedance
CD, etc. (1 kHz, 40 mV, 8 ) ............................... 150 mV/100
Frequency Response
CD to Front L/R ............................... 10 Hz to 100 kHz, +0/–3 dB
RIAA Equalization Deviation
PHONO (20 Hz to 20 kHz) .......................................... 0 ± 0.5 dB
Total Harmonic Distortion
PHONO to OUT (REC)
(20 Hz to 20 kHz, 1 V) ......................................... 0.02% or less
CD, etc. to Front L/R
(20 Hz to 20 kHz, 60 W, 8 Ω) ............................... 0.04% or less
Signal to Noise Ratio (IHF-A Network)
PHONO (5 mV) to Front L/R
[Australia, U.K. and Europe models] ..................... 81 dB or more
[Other models] ........................................................ 86 dB or more
CD, etc. (250 mV) to Front L/R ........................... 100 dB or more
Residual Noise (IHF-A Network)
Front L/R ............................................................... 150 µV or less
Channel Separation (1 kHz/10 kHz)
PHONO (shortened) to Front L/R ............... 60 dB/55 dB or more
CD, etc.
(5.1 k shortened) to Front L/R ............... 60 dB/45 dB or more
Tone Control Characteristics (Front L/R)
BASS Boost/Cut ........................................................ ±6 dB/50 Hz
BASS Turnover Frequency .................................................350 Hz
TREBLE Boost/Cut ................................................ ±6 dB/20 kHz
TREBLE Turnover Frequency ...........................................3.5 kHz
Zone 2/Zone 3 Tone Control Characteristics (Front L/R)
BASS Boost/Cut .................................................... ±10 dB/100 Hz
BASS Turnover Frequency .................................................450 Hz
TREBLE Boost/Cut .............................................. ±10 dB/20 kHz
TREBLE Turnover Frequency ...........................................1.5 kHz
Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz)
H.P.F. (Front, Center, Surround, Surround back) ...........12 dB/oct.
L.P.F. (Subwoofer) .........................................................24 dB/oct.
VIDEO SECTION
Video Signal Type (Gray Back)
[U.S.A., Canada, General and Korea models] .................... NTSC
[U.K., Europe, Australia, Asia and China models] ................ PAL
Video Signal Type (Video Conversion) .......................... NTSC/PAL
Signal Level
Composite ................................................................. 1 Vp-p/75
S-video ............................ 1 Vp-p/75 (Y), 0.286 Vp-p/75 (C)
Component ................... 1 Vp-p/75 (Y), 0.7 Vp-p/75 (PB/PR)
Maximum Input Level (V CONV. off) ................. 1.5 Vp-p or more
Signal to Noise Ratio (V CONV. off) ....................... 60 dB or more
Frequency Response (MONITOR OUT)
Component (V CONV. off) ................... 5 Hz to 100 MHz, ±3 dB
FM SECTION
Tuning Range
[U.S.A. and Canada models] ........................... 87.5 to 107.9 MHz
[Asia and General models] ........ 87.5/87.50 to 108.0/108.00 MHz
[Other models] ............................................ 87.50 to 108.00 MHz
50 dB Quieting Sensitivity (IHF)
Mono/Stereo ........................................ 2.0/25 µV (17.3/39.2 dBf)
Usable Sensitivity (IHF) ....................................... 1.0 µV (11.2 dBf)
Selectivity (400 kHz) .............................................................. 70 dB
Signal to Noise Ratio (IHF)
Mono/Stereo .............................................................. 76 dB/70 dB
Harmonic Distortion (1 kHz)
Mono/Stereo .................................................................... 0.2/0.3%
Stereo Separation (1 kHz)
Stereo .....................................................................................42 dB
Frequency Response
Stereo .............................................. 20 Hz to 15 kHz, +0.5, –2 dB
Antenna Input (unbalanced) ..................................................... 75
AM SECTION
Tuning Range
[U.S.A. and Canada models] .............................. 530 to 1710 kHz
[Asia and General models] ................. 530/531 to 1710/1611 kHz
[Other models] ................................................... 531 to 1611 kHz
Usable Sensitivity ............................................................. 300 µV/m
SPECIFICATIONS