Filter
Top Products
CONTROLS AND FUNCTIONS
7
English
INTRODUCTION
English
H SELECT k/n
Selects another component that you can control
independently of the input component selected with the
input selector buttons.
I VOL +/–
Increases or decreases the volume level.
J AMP/SOURCE/TV
Selects the component you want to control with the
remote control.
AMP: Set to this position to operate this unit.
SOURCE: Set to this position to operate the component
selected with an input selector button.
TV: Set to this position to operate the television.
To set the remote control codes for components, see
page 69.
K MUTE
Mutes the sound. Press again to restore the audio output to
the previous volume level.
L PURE DIRECT
Turns on or off PURE DIRECT mode (see page 37).
M SET MENU
Selects the SET MENU mode.
N NIGHT
Turns on or off the night listening modes (see page 38).
O ON SCREEN
Selects the display mode of the on-screen display (OSD)
this unit sends to your monitor.
P STRAIGHT/EFFECT
Switches the sound fields off or on. When STRAIGHT is
selected, input signals (2-channel or multi-channel) are
output directly from their respective speakers without
effect processing.
Q EXTD. SUR
Switches between 5.1 or 6.1/7.1 channel playback of
multi-channel software.
R RE-NAME
Used to change the input source name in the display
window (see page 73).
S CLEAR
Used to clear functions acquired when using the learn and
rename features, or setting remote control codes (see
page 76).
T LEARN
Used to set up the remote control code or program
functions from other remote controls (see pages 69 and
71).
■ U.K. and Europe models only
U RDS tuning buttons
(Available when this unit is in tuner mode)
FREQ/RDS
Press this button when the unit is receiving an RDS station
to cycle the display between the PS mode, PTY mode, RT
mode, CT mode (if the station offers those RDS data
services) and/or the frequency display mode (see page 45).
EON
Press this button to select a radio program type (NEWS,
INFO, AFFAIRS, SPORT) to tune in automatically (see
page 47).
PTY SEEK MODE
Press this button to set the unit to the PTY SEEK mode
(see page 46).
PTY SEEK START
Press this button to begin searching for a station after the
desired program type has been selected in the PTY SEEK
mode (see page 46).