Yamaha RX-V1500 Stereo System User Manual


 
58
SET MENU
4 Press l / h repeatedly to change the setting
of the item you want to adjust.
5 To exit, press k / n repeatedly until the menu
disappears or just press one of the sound
field program group buttons.
Use to manually adjust any speaker setting or compensate
for video signal processing delays when using LCD
monitors or projectors. Most of the SOUND parameters
are set automatically when you run auto setup (see
page 26).
Speaker set A)SPEAKER SET
Use to manually adjust any speaker setting.
y
If you are not satisfied with the bass sounds from your speakers,
you can change these settings according to your preference.
Set any THX speakers to SMALL (SML).
Center speaker CENTER SP
Choices: NONE, SML, LRG
Select “NONE” if you do not have a center speaker.
The unit directs all of the center channel signal to the
front left and right speakers.
Select “SML” if you have a small center speaker. The
unit directs the low-frequency signals of the center
channel to the speakers selected in LFE/BASS OUT.
Select “LRG” if you have a large center speaker. The
unit directs the entire range of the center channel signal
to the center speaker.
Front speakers FRONT SP
Choices: SMALL, LARGE
Select “SMALL” if you have small front speakers. The
unit directs the low-frequency signals of the front
channel to the speakers selected in LFE/BASS OUT.
Select “LARGE” if you have large front speakers. The
unit directs the entire range of the front left and right
channel signals to the front left and right speakers.
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is in the standby mode.
However, if the power cord is disconnected from the
AC outlet, or the power supply is cut for more than one
week, the stored data will be lost. If so, adjust the
items again.
or
ENTER
THX STANDARD EXTD. SUR
ENTERTAIN
MUSIC TY THTR
MOVIE
STEREO HALL JAZZ
ROCK
3421
90
+10
ENT.
5678
Using SOUND MENU
Note
. A)SPEAKERSET
B)SPEAKERLEVEL
C)SPDISTANCE
D)GRAPHICEQ
: Up/Down
p
/
p
: Enter
</>
2 SOUND
MENU 1/3
NONE [SML LRG
CENTER SP
[SMALL LARGE
FRONT SP