Filter
Top Products
45
TUNING
BASIC
OPERATION
English
RDS (Radio Data System) is a data transmission system
used by FM stations in many countries. The RDS function
is carried out among the network stations.
This unit can receive various RDS data such as PS
(Program Service name), PTY (Program Type), RT (Radio
Text), CT (Clock Time), EON (Enhanced Other
Networks) when receiving RDS broadcasting stations.
■ PS (Program Service name) mode:
The name of the RDS station being received is displayed.
■ PTY (Program Type) mode:
There are 15 program types to classify RDS stations.
■ RT (Radio Text) mode:
Information about the program (such as the title of the
song, name of the singer, etc.) on the RDS station being
received is displayed by a maximum of 64 alphanumeric
characters, including the umlaut symbol. If other
characters are used for RT data, they are displayed with
under-bars.
■ CT (Clock Time) mode:
The current time is displayed and updated every minute.
If the data flow is accidentally cut off, “CT WAIT” may
appear.
■ EON (Enhanced Other Networks):
See “EON function” on page 47.
Four modes are available in this unit for displaying RDS
data. The PS, PTY, RT and/or CT indicators that
correspond to the RDS data services offered by the station
light up in the front panel display. Press RDS MODE/
FREQ (or FREQ/RDS on the remote control) repeatedly
to display the various RDS data offered by the
transmitting station as shown below.
y
When performing this operation with the remote control, first
press TUNER to set the remote to tuner mode.
• Do not press RDS MODE/FREQ until an RDS indicator lights
up in the front panel display. You cannot change the mode if
you press the button prior to this. This is because this unit has
not finished receiving all of the RDS data from the station.
• RDS data not offered by the station cannot be selected.
• This unit cannot utilize the RDS data source if the signal
received is not strong enough. In particular, the RT mode
requires a large amount of data, so it is possible that the RT
mode may not be displayed even if other RDS modes (PS, PTY,
etc.) are displayed.
• RDS data may not be received under poor reception conditions.
In such cases, press TUNING MODE so that the AUTO
indicator disappears from the front panel display. Although this
will change the reception mode to manual, RDS data may be
displayed when you change the display to RDS mode.
• If the signal strength is weakened by external interference
during the reception of an RDS station, the RDS data service
may be cut off suddenly and “...WAIT” will appear on the front
panel display.
Receiving RDS stations
NEWS News
AFFAIRS Current affairs
INFO General information
SPORT Sports
EDUCATE Education
DRAMA Drama
CULTURE Culture
SCIENCE Science
VARIED Light entertainment
POP M Pop
ROCK M Rock
M.O.R. M
Middle-of-the-road music
(easy-listening)
LIGHT M Light classics
CLASSICS Serious classics
OTHER M Other music
Changing the RDS mode
Notes
RDS MODE
/FREQ
FREQ/RDS
PS
PTY
RT
CT
Frequency
display mode
or
Front panel
Remote control