Filter
Top Products
SET MENU
56
You can use the following parameters in SET MENU to adjust a variety of system settings and customize the way this
unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening
environment.
■ AUTO SETUP
Use to specify which speaker parameters auto setup will adjust, and to activate the auto setup procedure (see page 26).
■ MANUAL SETUP
Use to manually adjust speaker and system settings.
BASIC MENU
Use to quickly setup basic system parameters (see page 31).
SOUND MENU
Use to manually adjust any speaker setting, alter the quality and tone of the sound output by the system or compensate for
video signal processing delays when using LCD monitors or projectors.
y
Most of the parameters described in SOUND MENU are set automatically when you run auto setup (see page 26). You can use SOUND
MENU to make further adjustments, but we recommend running auto setup first.
INPUT MENU
Use to reassign digital input/outputs, select the input mode, rename your inputs, or specify external input settings.
SET MENU
Item Features Page
A)SPEAKER SET
Selects the size of each speaker, the speakers for low-frequency signal output, and the cross over
frequency.
58
B)SPEAKER LEVEL
Adjusts the output level of each speaker.
60
C)SP DISTANCE
Adjusts the delay time of each speaker.
60
D)GRAPHIC EQ
Adjusts the tonal quality of each speaker.
61
E)LFE LEVEL
Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.
61
F)DYNAMIC RANGE
Adjusts the dynamic range for Dolby Digital or DTS signals.
61
G)LOW FRQ. TEST
Matches the subwoofer level with the level of the other speakers.
62
H)HP TONE CTRL
Adjusts the tonal balance of the headphones.
62
I)AUDIO SET
Customizes overall audio settings of this unit.
62
J)PR/SBch SELECT
Selects priority to either surround back or presence speakers when both sets of speakers are
connected to this unit.
63
Item Features Page
A)I/O ASSIGNMENT
Assigns jacks according to the component to be used.
63
B)INPUT MODE
Selects the initial input mode of the source.
64
C)INPUT RENAME
Changes the name of the inputs.
64
D)MULTI CH INPUT
Sets the direction of the signals input into the center, subwoofer and surround channels for the
source component connected to the MULTI CH INPUT jacks.
65