Filter
Top Products
32
BASIC SETUP
7 Press n to select SPEAKERS, then press
l / h to select the number of speakers
connected to the unit.
The choices vary as follows depending on the
PRESENCE setting:
*
Surround back and presence speakers do not output sound
simultaneously. You can set to prioritize either set of speakers
in SOUND MENU (see page 63).
8 After you have finished the settings, press n,
then press l / h to select:
SET To apply the changes.
CANCEL To cancel the setup.
If you select “SET”, you will hear a test tone from
each speaker.
9 Press n to select CHECK OK?, then press
l / h to select:
YES
To exit the setup if the test tones were
satisfactory.
NO To adjust each speaker level (see page 60).
Choices
PRESENCE setting
YES
NONE
2
——
Front L/R
3
——
Front L/R,
Center
4
Presence L/R,
Front L/R
Front L/R,
Surround L/R
5
Presence L/R,
Front L/R,
Center
Front L/R,
Center,
Surround L/R
6
Presence L/R,
Front L/R,
Surround L/R
Front L/R,
Center,
Surround L/R,
Surround back
7
Presence L/R,
Front L/R,
Center,
Surround L/R
Front L/R,
Center,
Surround L/R,
Surround back
L/R
8
Presence L/R,
Front L/R,
Center,
Surround L/R,
Surround back
*
——
9
Presence L/R,
Front L/R,
Center,
Surround L/R,
Surround back
L/R
*
——
LL C R
SL SB SR
LL CR
SL SB SR
LL R
LL C R
SL SB SR
LL RC
LL C R
SL SB
SB
SR
LL R
SL SR
LL C R
SL SB SR
LL C R
SL SR
LL C R
SL SB SR
LL C R
SL SB SR
LL C R
SL SB SR
.[SET CANCEL
ROOM SIZE=MEDIUM
1 BASIC MENU 2/2
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is in the standby mode.
However, if the power cord is disconnected from the
AC outlet, or the power supply is cut for more than one
week, the stored data will be lost. If so, adjust the
items again.
. CHECK OK?;;;;YES
1 BASIC MENU 2/2
-+
. FR
C
SL
B)SPEAKER
LEVEL
(when “NO” is selected)