83
English
INTRODUCTION PREPARATION
BASIC
OPERAIONT
ADVANCED
OPERATION
ADDITIONAL
INFORMATION
APPENDIX
SPECIFICATIONS
AUDIO SECTION
• Minimum RMS Output Power for Main, Center, Rear
20 Hz to 20 kHz, 0.04% THD, 8 Ω ..................................... 100 W
• Maximum Power (EIAJ)
[China model]
1 kHz, 10% THD, 8 Ω......................................................... 150 W
• Dynamic Power (IHF)
8/6/4/2 Ω ........................................................ 140/170/205/245 W
• Damping Factor
20 Hz to 20 kHz, 8 Ω ................................................... 80 or more
• Frequency Response
CD to Main L/R......................................10 Hz to 100 kHz, –3 dB
• Total Harmonic Distortion
20 Hz to 20 kHz, 50 W, 8 Ω, Main L/R................................0.04%
• Signal to Noise Ratio (IHF-A Network)
PHONO MM to REC OUT (5 mV, shorted)
[U.S.A., Canada and China models] ................................. 86 dB
[Australia model]............................................................... 81 dB
CD (250 mV, shorted) to Main L/R, Effect Off.................. 100 dB
• Residual Noise (IHF-A Network)
Main L/R ................................................................ 150 µV or less
• Channel Separation (1 kHz/10 kHz)
CD (5.1 kΩ terminated) to Main L/R........................ 60 dB/45 dB
• Tone Control (Main L/R)
BASS Boost/Cut ...................................................... ±10 dB/50 Hz
TREBLE Boost/Cut............................................... ±10 dB/20 kHz
BASS EXTENSION.................................................. +6 dB/60 Hz
• Phones Output ...........................................................150 mV/100 Ω
• Input Sensitivity
CD, etc....................................................................150 mV/47 kΩ
PHONO ...................................................................2.5 mV/47 kΩ
6CH INPUT............................................................150 mV/47 kΩ
• Output Level
REC OUT ..............................................................150 mV/1.2 kΩ
PRE OUT ..................................................................1.0 V/1.2 kΩ
SUBWOOFER .......................................................... 4.0 V/1.2 kΩ
VIDEO SECTION
• Video Signal Type ...................................................... NTSC or PAL
• Composite Video Signal Level ......................................1 Vp-p/75 Ω
• S-Video Signal Level
Y .................................................................................1 Vp-p/75 Ω
C .......................................................................... 0.286 Vp-p/75 Ω
• Component Video Signal Level
Y .................................................................................1 Vp-p/75 Ω
P
B
/C
B
, P
R
/C
R
............................................................. 0.7 Vp-p/75 Ω
• Signal to Noise Ratio............................................................... 50 dB
• Frequency Response (MONITOR OUT)
Composite, S-Video ................................. 5 Hz to 10 MHz, –3 dB
Component ................................................. DC to 60 MHz, –3 dB
FM SECTION
• Tuning Range
[U.S.A. and Canada models] ............................87.5 to 107.9 MHz
[Australia and China models].......................87.50 to 108.00 MHz
• 50 dB Quieting Sensitivity (IHF, 100% mod.)
Mono/Stereo ........................ 2.0 µV (17.3 dBf) /25 µV (39.2 dBf)
• Selectivity (400 kHz)............................................................... 70 dB
• Signal to Noise Ratio (IHF)
Mono/Stereo .............................................................. 76 dB/70 dB
• Harmonic Distortion (1 kHz)
Mono/Stereo ................................................................. 0.2%/0.3%
• Stereo Separation (1 kHz) ....................................................... 45 dB
• Frequency Response........................... 20 Hz to 15 kHz +0.5, –2 dB
AM SECTION
• Tuning Range ......................................... 530/531 to 1710/1611 kHz
• Usable Sensitivity............................................................. 300 µV/m
GENERAL
• Power Supply
[U.S.A. and Canada models] ............................... AC 120 V/60 Hz
[Australia model]................................................. AC 240 V/50 Hz
[China model]...................................................... AC 220 V/50 Hz
• Power Consumption
[U.S.A. and Canada models] .................................. 400 W/500 VA
[Australia and China models].............................................. 410 W
Standby Mode .............................................................. 1 W or less
• AC Outlets
[U.S.A. and Canada models] ................. 2 (Total 80 W maximum)
[China model]........................................ 2 (Total 50 W maximum)
[Australia model].......................................... 1 (100 W maximum)
• Dimension (W x H x D)
................... 435 x 171 x 434 mm (17-1/8” x 6-3/4” x 17-1/16”)
• Weight .........................................................................15 kg (33 lbs)
• Accessories .......................................................................See page 3
*Specifications are subject to change without notice.
0112HTR5590_76-83_EN(U) 02.8.5, 4:32 PM83