Filter
Top Products
32
BASIC PLAYBACK
■ Playing the Dolby Digital EX or
DTS ES software
Press EX/ES to turn on the Dolby Digital EX or DTS ES
decoder to listen to the Dolby Digital EX and DTS ES
software with a rear center speaker.
Press EX/ES to select the mode. (The modes that can be
selected vary depending on the format of the software to
play.)
AUTO: This mode automatically switches Dolby
Digital EX/DTS ES Matrix 6.1/DTS ES
Discrete 6.1 depending on the signal in the
input source that this unit can detect. Rear
center speaker does not work for 5.1 channel
sources.
Discrete 6.1: This mode can be selected only when the
source with DTS ES Discrete format has
been detected. (The DISCRETE indicator
lights up.)
Matrix 6.1: This mode makes 6-channel playback of the
input source through the Matrix 6.1 decoder.
(Either
EX
or MATRIX indicator lights
up.)
OFF: Rear center speaker does not work in this
mode.
Notes
• Some 6.1-channel compatible discs do not have a signal (flag)
which this unit can automatically detect. When playing these
kinds of discs with 6.1-channel, select “Matrix 6.1”.
• 6.1-channel playback is not possible even if EX/ES is pressed
in the following cases:
1 When “1C REAR L/R SP”is set to “NONE”.
2 When the sound effect is turned off.
3 When the source connected to the 6CH INPUT jack is
being played.
4 When Dolby Digital KARAOKE source is being played.
5 When the power of this unit is turned off, the input mode
will be reset to AUTO.
6 When headphones are connected.
EX/ES
CHP/INDEX
12
RL
LCR
RR
LFE
MOVIE THEATER
1
VCR DVD TUNER CD
PHONO
CD RV AUX
DSP
EX
1
SP
DIGITAL
VCR2/DVR
CBL
/
SAT
MD
/
TAPE
TV
/
LD
VOLUME
D
A
Matrix 6.1 ~
■ Virtual CINEMA DSP
With the Virtual CINEMA DSP, you can enjoy all the
DSP programs without rear speakers. It creates the virtual
speakers to reproduce the natural sound field.
The sound field processing is changed to the Virtual
CINEMA DSP mode according to the selected DSP
program by setting “1C REAR L/R SP” on the SET
MENU to NONE.
Note
• This unit is not set in the virtual CINEMA DSP mode even if
“1C REAR L/R SP” is set to NONE in the following cases:
– when the 6ch Stereo, DOLBY DIGITAL Normal, Pro Logic
Normal, Pro Logic , DTS Normal or Neo: 6 program is
selected;
– when the sound effect is turned off;
– when 6CH INPUT is selected as the input source;
– when 96-kHz sampling digital signals are input to this unit;
– when using the test tone; or
– when connecting the headphones.
■ SILENT CINEMA DSP
You can enjoy the powerful sound field as if there were
actual speakers with the SILENT CINEMA DSP. You can
listen to SILENT CINEMA DSP by connecting your
headphones to the PHONES jack while the digital sound
field processor is on. Enjoy all the DSP program using the
headphones. The “SILENT” indicator lights up on the
front panel display. (If the sound effect is off, you listen to
the source with normal stereo reproduction.)
Note
• This unit is not set in the SILENT CINEMA DSP mose even if
the sound effect is on in the following cases:
–when 6CH INPUT is selected as the input source
–when over 48 kHZ sampling digital signals are being input
(Example: when playing the Dolby Digital EX software)
0105HTR5590_27-33_EN(U) 8/7/02, 6:09 PM32