Yamaha HTR-5130 Stereo System User Manual


 
20
LR
867
REC/PAUSE
DIR BDIR A
PLAY
DISC
POWER /I
VOLUME
PLAY
PRESET
A/B/C/D/E
–+
TIME/
LEVEL
TEST
EFFECT
PROGRAM
PROLOGIC
ENHANCED
–+
SLEEP
TAPE
A/B
ON/OFF
2CH
/6CH
TUNER
CD
PHONO
DELAY/CENTER
/REAR/SWFR
DVD/LD
VCR
TV/DBS
7
9
10
6 Select the center channel output mode suitable for your
speaker configuration.
(Refer to “SPEAKER CONFIGURATION” on page 7.)
On the feature of each mode, refer to the “Note” shown
below.
Note
In step 6, when you select a center channel output mode, note
the following.
For 5 speaker configuration
NORMAL: Select this mode when you use a center speaker
that is smaller than the main speakers. In this
mode, the bass tone will be output from the main
speakers.
WIDE: Select this mode when you use a center speaker
approximately the same size as the main
speakers.
For 4 speaker configuration
PHANTOM: Select this mode when you do not use the center
speaker. The center speaker sound will be output
from the left and right main speakers.
CENTER MODE
NORMAL
WIDE
PHANTOM
4
VOLUME
l6
20
28
40
60
l2
8
4
2
0
–dB
BALANCE
55
4
3
2
l
0
l
2
3
4
LR
7Turn up the volume.
You will hear a test tone (like pink noise) in order from the
left main speaker, the center speaker, the right main
speaker, and then the rear speakers for about two seconds
each. The display changes as shown below.
* The test tone from the left rear speaker and the right rear
speaker will be heard at the same time.
8 Adjust the BALANCE control so that the sound output
level of the left main speaker and the right main
speaker are the same.
Main (L) Center
Rear (L and R) Main (R)