Filter
Top Products
85 En
Graphical user interface (GUI) screen
ADVANCED
OPERATION
English
Use this menu to adjust the sound parameters.
1 Set the operation mode selector to
D
AMP
and then press
G
SET MENU on the remote
control.
2 Press
4
k / n on the remote control to select
“Manual Setup” and then press
4
h.
3 Press
4
k / n / l / h on the remote control to
select “Sound” and then press
4
h.
4 Select the desired parameters and then press
4
h to access and adjust.
■ LFE Level (Low-frequency effect level)
Use this feature to adjust the output level of the LFE (low-
frequency effect) channel according to the capacity of
your subwoofer or headphones. The LFE channel carries
low-frequency special effects which are only added to
certain scenes. This setting is effective only when this unit
decodes bitstream signals.
Control range: –20.0 to 0.0 dB
Control step: 1.0 dB
Speakers (Speaker low-frequency effect level)
Select to adjust the speaker LFE level.
Headphones
(Headphone low-frequency effect level)
Select to adjust the headphone LFE level.
Depending on the settings of “Bass Out” (see page 92), some
signals may not be output at the SUBWOOFER PRE OUT jack.
■ Dynamic Range (Dynamic range)
Use this feature to select the amount of dynamic range
compression to be applied to your speakers or
headphones. This setting is effective only when the unit is
decoding bitstream signals.
Speakers (Speaker dynamic range)
Adjusts the dynamic range compression for the speakers.
Headphones (Headphone dynamic range)
Adjusts the dynamic range compression for the
headphones.
■ Parametric EQ (Parametric equalizer)
Use this feature to adjust the parametric equalizer of each
speaker.
1 Press
4
k / n / l / h to select Test Tone or
the speaker you want to adjust.
Manual Setup (Sound)
Note
Choice Functions
MAX
Preserves the greatest amount of dynamic range.
STD
Adjusts the dynamic range to medium. When
this unit is decoding Dolby TrueHD signals, the
dynamic range control is always active
regardless of the instruction of the input source
signals.
MIN/AUTO
• MIN: Adjusts the dynamic range to narrow
when this unit is decoding bitstream signals
(except Dolby TrueHD).
• AUTO: Adjusts the dynamic range according
to the instruction of the input source signals
when this unit is decoding Dolby TrueHD
signals.
Choice Adjusted speaker
Front L
Front left speaker
Front R
Front right speaker
Center
Center speaker
Surround L
Surround left speaker
Surround R
Surround right speaker
Surround Back L
Surround back left speaker
Surround Back R
Surround back right speaker
Presence L
Presence left speaker
Presence R
Presence right speaker
Subwoofer
Subwoofer
LFE Level
Dynamic Range
Parametric EQ
Tone Control
Lipsync
Test Tone
Front L
Front R
Center