Filter
Top Products
96 En
Graphical user interface (GUI) screen
This menu adjusts the optional system settings.
1 Set the operation mode selector to
D
AMP
and then press
G
SET MENU on the remote
control.
2 Press
4
k / n to select “Manual Setup” and
then press
4
h.
3 Press
4
k / n / l / h to select “Option” and
then press
4
h.
4 Select the desired parameters and then press
4
h to access and adjust.
■ Front Panel Disp.
(Front panel display setting)
Dimmer (Dimmer)
Use this feature to adjust the brightness of the front panel
display.
Control range: – 4 to 0
Scroll (Front panel display message scroll)
Use this feature to set whether to display the information
(such as song title or channel name) in the front panel
display in a continuous manner or by the first 14
alphanumeric characters after scrolling all characters once
when “XM”, “DOCK” or “NET/USB” is selected as the
input source.
■ iPod (iPod settings)
Standby Charge
(iPod charge on the standby mode)
Use this feature to select whether this unit charges the
battery of the stationed iPod or not when this unit is in the
standby mode (see page 62).
■ Zone OSD (On-screen display)
Use this feature to display the operational status of Zone 2
as well as Zone 3 on the Zone 2 video monitor connected
to the ZONE VIDEO jacks on the rear panel of this unit.
The Zone 2 and Zone 3 information to be displayed is
listed as follows:
• The input source
• The volume level
• The audio mute status
• The tonal quality status
• The XM Satellite Radio information when XM is
selected as the input source of Zone 2 and/or Zone 3
Manual Setup (Option)
Video
Basic
Option
Front Panel Disp.
iPod
Zone OSD
Zone2 Set
Zone3 Set
0
Dimmer
Scroll
Choice Functions
Continue
Continuous mode.
Select this to display the operation status in the
front panel display in a continuous manner.
Once
Scroll-once mode.
Select this to display the operation status in the
front panel display by the first 14 alphanumeric
characters after scrolling all characters once.
Choice Functions
Auto
Charges the battery of the stationed iPod when
this unit is turned on and in the standby mode.
Off
Charges the battery of the stationed iPod only
when this unit is turned on.
Choice Functions
Off
Does not display any operational status of Zone
2 and Zone 3.
Zone2
Displays the operational status of Zone 2 only.
Zone2&Zone3
Displays the operational status of Zone 2 and
Zone 3.