Filter
Top Products
SAVING AND RECALLING THE SYSTEM SETTINGS (SYSTEM MEMORY)
100 En
Use this feature to save up to six of your favorite settings
that can be easily recalled when needed. You can save the
following system setting parameters:
* The settings of “Dynamic Range”, “LFE Level”, “Tone
Control”, and the tonal quality control for headphones are not
saved.
■ Saving by the
N
SYSTEM MEMORY
buttons
You can save the system settings stored in “Memory1” to
“Memory4” by pressing the corresponding
N
SYSTEM
MEMORY buttons.
Press and hold one of the
N
SYSTEM MEMORY
buttons on the remote control for 4 seconds.
“MEMORY 1 SAVE Done” (example) appears in the front
panel display, and then this unit saves the current system
setting to the corresponding memory number.
If system settings are already saved in the selected memory
number, this unit overwrites the old system settings.
■ Saving by the SET MENU operation
You can save the system settings stored in “Memory1” to
Memory6” by using the “System Memory” menu in “SET
MENU”.
1 Press
G
SET MENU on the remote control.
The top menu appears in the GUI.
2 Press 4k / n repeatedly to select “System
Memory” and then press 4h.
The “System Memory” menu appears in the GUI.
3 Press 4k / n to select “Save” and then press
4h.
The following menu appears in the GUI.
Saving and recalling the system settings (System Memory)
Saved parameters Page
“Stereo/Surround” parameters
74
“Volume” parameters
(except “Initial Volume”)
84
“Sound” parameters* (except “EXTD
Surround” and “Channel Mute”)
85
“Video” parameters (except “Short Message”)
89
“Basic” parameters
91
“Front Panel Disp.” parameters
96
“Support Audio”
98
Currently selected sound field program (or the
Pure Direct mode)
45, 51
Tonal quality control settings*
51
Saving the current system settings
Before performing the following operations, set the operation
mode selector on the remote control to
D
AMP.
Note
4
3
2
1
SYSTEM MEMORY
Stereo/Surround
Input Select
Manual Setup
Auto Setup
System Memory
Sound
Video
Basic
NET/USB
Option
Load
Save
Current
Memory1
Memory2
Memory3
Memory4
Current
Memory1
Memory2
Sci-Fi
SpeakerCH 4/3/0.1
LFE Level 0dB
D-Range MAX
PEQ YPAO Natural
Current system parameters