Filter
Top Products
58 En
XM™ Satellite Radio tuning
■ All Channel Search mode
1 Press
I
SEARCH MODE (or
G
SRCH
MODE) repeatedly to select “ALL CH
SEARCH”.
2 Press
G
CATEGORY (or
4
A-E/CAT. l / h)
repeatedly to change the channel category.
3 Press
H
PRESET/TUNING/CH l / h (or
4
PRESET/CH k / n) repeatedly to search
for a channel within all channels.
y
You can search for a channel quickly by pressing and
holding
H
PRESET/TUNING/CH l / h (or
4
PRESET/CH k / n).
■ Category Search mode
1 Press
I
SEARCH MODE (or
G
SRCH
MODE) repeatedly to select “CAT SEARCH”.
2 Press
G
CATEGORY (or
4
A-E/CAT. l / h)
repeatedly to change the channel category.
3 Press
H
PRESET/TUNING/CH l / h (or
4
PRESET/CH k / n) repeatedly to search
for a channel within the selected channel
category.
y
You can search for a channel quickly by pressing and
holding
H
PRESET/TUNING/CH l / h (or
4
PRESET/CH k / n).
■ Preset Search mode
Prior to selecting a preset channel in the Preset Search
mode, you must preset XM Satellite Radio channels. For
details, see “Setting the XM™ Satellite Radio preset
channels” on page 59.
y
The initial factory setting of all preset channels (A1 to E8) is
“[001] Preview”.
1 Press
I
SEARCH MODE (or
G
SRCH
MODE) repeatedly to select “PRESET
SEARCH”.
2 Press
G
CATEGORY (or
4
A-E/CAT. l / h)
repeatedly to change the preset channel
group (A to E).
3 Press
H
PRESET/TUNING/CH l / h (or
4
PRESET/CH k / n) repeatedly to change
the preset channel number (1 to 8).
y
You can also select the preset channel number directly by
pressing the numeric buttons (1 to 8) on the remote control.
■ Direct Number Access mode
1 Press
G
SRCH MODE on the remote control
repeatedly to select “ALL CH SEARCH” or
“CAT SEARCH”.
Before performing the following operations, set the operation
mode selector on the remote control to
D
SOURCE and then
press 1XM.
ALL CH SEARCH
CAT SEARCH
PRESET SEARCH
ALL CH SEARCH
CAT SEARCH
or