Yamaha RX-V3800 Stereo Receiver User Manual


 
SOUND FIELD PROGRAMS
45 En
BASIC
OPERATION
English
This unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-channel playback from
almost any stereo or multi-channel sound source. This unit is also equipped with a Yamaha digital sound field processing
(DSP) chip containing several sound field programs which you can use to enhance your playback experience.
y
The Yamaha CINEMA DSP sound field program are compatible with all Dolby Digital, DTS, Dolby Surround, Dolby TrueHD, and
DTS-HD Master Audio sources.
The Yamaha HiFi DSP sound field programs recreate real-world acoustic environments made from precise measurements taken in
actual concert halls, music venues, movie theaters, etc. Thus, you may notice variations in the strength of the reflections coming from
the front, back, left and right.
Rotate the
O
PROGRAM selector (or set the
operation mode selector to
D
AMP and then
press one of the sound field selector buttons (O)
repeatedly).
The name of the selected sound field program appears in
the front panel display and in the short message display.
When you select an input source, this unit automatically selects
the last sound field program used with the corresponding input
source.
Sound field programs cannot be selected when the component
connected to the MULTI CH INPUT jacks is selected as the
input source (see page 42) or when this unit is in the Pure Direct
mode (see page 51).
When you play back DTS 96/24 sources with any sound field
program, this unit applies the selected program without
activating the DTS 96/24 decoder.
Sampling frequencies higher than 48 kHz are sampled down to
48 kHz or lower and then sound field programs are applied.
y
You can select the desired sound field programs and setting the
parameters by using GUI screen. See page 74 for details.
y
Select a sound field program based on your listening preference, not merely on the name of the program, etc.
Sound field programs
Selecting sound field programs
Notes
Sound field program descriptions
Sound field indicators
Sci-Fi
MOVIE
8
MOVIE
This program clearly reproduces the finely elaborated sound design of the latest science fiction and special effects-featuring movies. You can
enjoy a variety of cinematographically created virtual spaces reproduced with clear separation between dialog, sound effects and background
music.
Available sound field parameters (see page 76)
Program description
Remote control
button
Name of the
program
Created sound
fields
CINEMA DSP
or
HiFi DSP
Category of the
program
Decoder Type Init. Delay Sur. Init. Delay SB. Init. Delay Dialogue Lift
DSP Level Room Size Sur. Room Size SB. Room Size
Presence sound field
Listening position
Surround left
sound field
Surround right
sound field
Surround back sound field