Filter
Top Products
P4ql'l_'
You call control the input source of Zone 2 independently
of the listening conditions in the main room.
1 Press ZONE 2 ON/OFF on the front panel to
turn on Zone 2.
2 Press ZONE 2 CONTROL on the front panel
The ZONE 2 indicator flashes in the front panel
display.
While the ZONE 2 indicator is flashing, rotate
the INPUT selector on the front panel to
select the input source of Zone 2.
INPUT
• You can also select the input soarce by using the Zone 2remote
control (sold separately). Press POWER on the Zone 2 remote
control to turn on Zone 2, and then press one of the input
selector buttons to select the input sonrce.
• You can mute the sound output to Zone 2 by pressing MUTE on
the ZONE 2 remote control. Press again to restore the sound
output.
38