Yamaha RX-497 Stereo Receiver User Manual


 
Customized automatic preset tuning
You can specify a preset station group and it preset station
number from which this unit stores the FM stations
received by automatic preset tuning.
1 Press and hold MEMORY on the front panel
for more than 3 seconds.
Press A/B/C/D/E and then press one of the
preset station/channel number buttons on
the front panel to select the preset station
group and the preset station number where
the first received station will be stored.
For example, if you select (75, the first received
station is automatically programmed to C5 and the
next received stations are sequentially programmed
to (76, (77, etc.
rigg_Yi'_|lql'lfl'[J
Press TUNING/CH <1 / E> on the front panel to
begin automatic preset tuning.
Press t::>to tune into higher frequencies.
Press <1 to tune into lower frequencies.
When automatic preset tuning is complete, the
frequency of the last preset station is shown in the
front panel display.
Automatic preset tuning stops when the received stations have all
been stored np to E8.
23