Filter
Top Products
There are 2 tuning methods autonmtic and manual. Select either method according to your preference and the strength of
station signals.
Automatic tuning is effective when station signals are
strong and there is no interference.
243
Rotate the INPUT selector (or press TUNER
on the remote control) to select TUNER as
the input source.
INPUT
_ TUNER
or
Front panel Remote control
Press TUNING/CH <:1/ _> once to begin
automatic tuning.
Press C>to tune into a higher frequency.
Press <:1to tune into a lower frequency.
• When you _ule into a station, the frequency of the received
station is shown in the front panel display.
• To search for another station, press TUNING CH <1 C> once
more.
• If the tuning search does not stop at the desired station because
the station signals are weak, try using the manual tuning
method.
Press FM/AM on the front panel to select the
reception band (FM or AM).
FM or AM appears in the front panel display.
FM/AM
Press TUN MODE on the front panel so that
the AUTO indicator lights up in the front
panel display.
_o,_,.p AUTO
Lights up
20