Filter
Top Products
1
Connecting the AM loop antenna
Set up the AM loop antenna.
Press and hold the tab.
3 Insert the AM loop antenna lead wires into
the AM ANT terminal.
5 Repeat steps 2 to 4 to insert the AM loop
antenna lead wires into the GND terminal.
6 Orient the AM loop antenna for the best
reception.
• The AM loup antenna should be placed away l?om this unit.
• A properly installed uutdour antenna provides clearer receptiuu
than an indour one. If you experience puor reception quality, an
outdour antenna may improve the quality. It is recommended
that you should connect a 5 to 10 m of vinyl-covered wire to the
AM ANT terminal and extend it outdoors l?um a window.
Cuusult your nearest authorized YAMAHA dealer or service
center about uutdoor antennas.
• The AM luop antenna should always be cunuected, even if an
outdour AM antenna is connected to this unit.
4 Release the tab.
13