Filter
Top Products
il'.JIF:lgdld[eiF:Idlel_l:[_e]_te]ld[J
• Adjusting the BALANCE control
Adjusts the sound output balance of the left and right
speakers to compensate fbr sound imbalance caused by
speaker locations or listening room conditions.
r__,llj/l'olAVl
gALAHCE
• Using the PURE DIRECT button
Routes input signals from your audio sources so that the
input signals bypass the BASS, TREBLE, BALANCE and
LOUDNESS controls, thus eliminating any alterations to
the audio signals and creating the purest possible sound.
o
PURE _I_ECT
©
• Adjusting the BASS and TREBLE
controls
Adjust the high and low frequency response.
BASS
Increases or decreases the low frequency response.
TREBLE
Increases or decreases the high frequency response.
o_s _REgLE
• Adjusting the LOUDNESS control
Retains a full tonal range at any volume level, thus
compensating for the human ears' loss of sensitivity to
high and low-fi'equency ranges at a low volume level.
If the PURE DIRECT button is turned on with the LOUDNESS
control set at a certain level, the inpm signals bypass the
LOUDNESS control, resulting in a sudden increase in the sound
ontput level. To prevent your ears or the speakers from being
undesirably damaged, be sure to press the PURE DIRECT button
AFTER lowering the sound output level or AFTER checking that
the LOUDNESS control is properly set.
1 Rotate the LOUDNESS control on the front
panel to the FLAT position.
LOUDNESS
C©I:
, ; 7
Rotate VOLUME on the front panel (or press
VOLUME +/- on the remote control) to set the
sound output level to the loudest listening
level that you would listen to.
Front panel
or
Remote control
3 Rotate the LOUDNESS control until the
desired volume is obtained.
LOUDNESS
FL_
16