Filter
Top Products
USING THE BUILT-IN TIMER
E-20
5 Press TUNING //? repeatedly to select the
source to be recorded, then press SET.
6 Press TUNING //? repeatedly to set the volume
level to VOL MIN, then press SET.
7 Press POWER to turn off the unit .
The unit is in standby mode for timer recording.
To cancel timer recording
Press TIMER so that “TIMER” disappears from the
display.
Note
• When you record a radio program on an MD, analog sound
is recorded. In this case, set the input mode of the MDX-M5
to the analog input mode.
Checking timer setting
When the timer settings are complete, you can check
them.
1 Press TIMER so that “TIMER” appears in the
display.
2 The timer settings appear in the display in the
following order:
Time to turn on
Time to turn off
Selected timer mode
Source to play
(PLAY or AI)
Source to be recorded
(REC)
or
Source to record
(REC)
Volume level
(PLAY or REC)
or
TIMER
REC
To change the timer setting
Press TIMER more than 2 seconds, and reset the timer
(see page 18 and 19).
Normal display
TIMER
REC