Filter
Top Products
USING THE BUILT-IN TIMER
E-18
Timer play
By using the built-in timer, you can have the unit turn
on at a specified time and begin play of a tape, CD, or
radio automatically. You can also specify the turn off
time.
1 Prepare the source to be played.
For tuner
Tune in to the station you will listen to.
For CD player
Insert the desired disc into the unit. If more than
one disc is inserted into the unit, select the disc by
pressing DISC SELECT.
For the MDX-M5 or KX-M5
Insert the desired MD or tape into the selected
unit. For details, refer to the instructions supplied
with the MDX-M5 or KX-M5.
2 Press and hold TIMER for more than 2 seconds.
3 Set the time to start play.
Press TUNING //? repeatedly to select the hour,
then press SET.
4 Press TUNING //? repeatedly to select the
minute, then press SET.
5 Set the hour and minute to stop play in the same
way as shown above if needed.
Before using the timer
1 Make sure the clock of the unit is correct (for
setting the clock, see page 7).
2 If you want to use the MDX-M5 or KX-M5 for timer
play, you must first make the connections as
shown in “Connecting other components” on page
5. For details, refer to the instructions supplied with
the MDX-M5 or KX-M5.
TIMER
SET
TUNING //?
POWER TIMER SET
TUNING
FM/AM ST/MONO DISC
MEMORY
TUNER CD
INPUT SLEEP MUTE VOLUME
CLOCK
TAPE
MD
CT
PTY RTRDS
/
231
12345
67890
TIME REP EDIT
PGM
PRESET
/
REC/
PAUSE
REC/
MUTE
CD
SYNC
+10
/
–+
POWER
TIMER
TIMER
TIMER
TIMER