Filter
Top Products
RECEIVING RDS STATIONS (U.K. and Europe models only)
E-16
Current time
TP (Traffic Program) mode
You can search the station which broadcasts the traffic
information.
1 Press FM/AM so that “FM” appears in the display.
2 Press RDS repeatedly so that “RDS” and “TP”
flash in the display.
3. Within 5 seconds, press TUNING / or ? to start
searching for a station which has TP data.
4. When the unit finds a station which has TP data, it
stops searching and the Program Service name
appears and “RDS” and “TP” lights up in the
display.
When the unit cannot find a station which has TP
data, “NO PROG” appears in the display, then the
frequency or Program Service name appears in the
display.
RT (Radio Text) mode
Information about the program (such as title of the
song, name of the singer, etc.) on the RDS station
being received is displayed.
1 Search the desired FM station with PS data (see
“To search the station with RDS data” on page 15).
2 When the station broadcasts RT data, “RDS” and
“RT” appears in the display.
3 Press RT.
RT data appears in the display.
If the station does not have RT data, “NO TEXT”
appears in the display, then the Program Service
name appears in the display.
CT (Clock Time) mode
The current time is displayed. The CT data from the
station being received changes every minute.
In this mode, the unit can correct the time of the built-in
clock automatically by synchronizing it with CT data.
1 Search the desired FM station with PS data (see
“To search the station with RDS data” on page 15).
2 Press CT.
“CT” and the current time appear in the display.
Note
• The CT data from the station is transferred every minute.
Therefore it takes up to 1 minute until the current time
appears, then press CT again to display the current time.
If the station does not have CT data, “NO CT” appears
in the display, then the Program Service name or
frequency appears in the display.
CT
TPRDS
RTRDS