Open as PDF
Preparing the CRW-F1 Drive
• Phillips screwdriver: Use the proper screwdriver for
the screws to install the CRW-F1 drive into the
• Narrow pliers: Insert and remove the included plastic
shunt for the jumper switch.
The serial number, printed on the label on the top of your CRW-F1 drive, is required
when you have a question about the drive or need user support services.
Please write the serial number down in the space below prior to installing the CRW-
F1 drive into your computer. It will be difficult to check the serial number after
(10 characters: 3 letters +