Filter
Top Products
Page: 26 Model BXAUDIO4X4
© 2005 Xantech Corporation
4. Press the ZONE (Keypad Source) button to be Linked with .
a. The ZONE (Keypad Source) button will flash ORANGE and GREEN.
5. To Link to additional Zones, press the rest of the ZONE (Keypad Source) buttons corresponding to the
Zones to be linked to.
6. To switch back to Zones 1 through 4 simply press the Keypad STATUS button again (the Keypad
Source Buttons now represent Zones 1 through 4).
7. Repeat steps 3 and 4 until all desired Zones are Linked.
To Un-Link Zones:
1. Make sure the BXAUDIO System is in RUN Mode Button [10] in the down position.
2. Press and Hold the STATUS button [44]and the CH+ button [42] simultaneously on the Zones Keypad.
a. The keypad STATUS LED will begin to flash RED.
b. Note: The Keypad Source buttons 1 thru 4 now represent ZONES 1 thru 4 [35=Zone 1,
36=Zone 2, 37=Zone 3, & 38=Zone 4].
3. Press the ZONE Button to be Un-Linked.
a. The ZONE Button will turn ORANGE.
4. Wait for the Keypads STATUS LED to stop flashing.
30 31
32
33
34 36 37
35
38
39
40
42
43
44
41
42
Programming Button Layout