Texas Instruments TMS320F2802 Stereo System User Manual


 
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230L–OCTOBER 2003–REVISED DECEMBER 2009
www.ti.com
Application Reports and Software
Key Links Include:
1. C2000 Get Started - www.ti.com/c2000getstarted
2. C2000 Digital Motor Control Software Library - www.ti.com/c2000appsw
3. C2000 Digital Power Supply Software Library - www.ti.com/dpslib
4. DSP Power Management Reference Designs - www.ti.com/dsppower
SPRAAQ7 TMS320x281x to TMS320x2833x or 2823x Migration Overview
describes how to migrate from the 281x device design to 2833x or 2823x designs.
SPRAAQ8 TMS320x280x to TMS320x2833x or 2823x Migration Overview
describes how to migrate from a 280x device design to 2833x or 2823x designs.
SPRAAN9 C28x FPU Primer
provides an overview of the floating-point unit (FPU) in the TMS320F28335,
TMS320F28334, and TMS320F28332 Digital Signal Controller (DSC) devices.
SPRAAM0 Getting Started With TMS320C28x Digital Signal Controllers is organized by
development flow and functional areas to make your design effort as seamless as possible.
Tips on getting started with C28x™ DSP software and hardware development are provided
to aid in your initial design and debug efforts. Each section includes pointers to valuable
information including technical documentation, software, and tools for use in each phase of
design.
SPRA958 Running an Application from Internal Flash Memory on the TMS320F28xxx DSP covers
the requirements needed to properly configure application software for execution from
on-chip flash memory. Requirements for both DSP/BIOS™ and non-DSP/BIOS projects are
presented. Example code projects are included.
SPRAA85 Programming TMS320x28xx and 28xxx Peripherals in C/C++ explores a hardware
abstraction layer implementation to make C/C++ coding easier on 28x DSPs. This method is
compared to traditional #define macros and topics of code efficiency and special case
registers are also addressed.
SPRAA88 Using PWM Output as a Digital-to-Analog Converter on a TMS320F280x Digital Signal
Controller presents a method for utilizing the on-chip pulse width modulated (PWM) signal
generators on the TMS320F280x family of digital signal controllers as a digital-to-analog
converter (DAC).
SPRAA91 TMS320F280x Digital Signal Controller USB Connectivity Using the TUSB3410
USB-to-UART Bridge Chip presents hardware connections as well as software preparation
and operation of the development system using a simple communication echo program.
SPRAAH1 Using the Enhanced Quadrature Encoder Pulse (eQEP) Module in TMS320x280x,
28xxx as a Dedicated Capture provides a guide for the use of the eQEP module as a
dedicated capture unit and is applicable to the TMS320x280x, 28xxx family of processors.
SPRAAI1 Using the ePWM Module for 0% 100% Duty Cycle Control provides a guide for the use
of the ePWM module to provide 0% to 100% duty cycle control and is applicable to the
TMS320x280x family of processors.
SPRAAD5 Power Line Communication for Lighting Applications Using Binary Phase Shift Keying
(BPSK) with a Single DSP Controller presents a complete implementation of a power line
modem following CEA-709 protocol using a single DSP.
SPRAAD8 TMS320x280x and TMS320F2801x ADC Calibration describes a method for improving the
absolute accuracy of the 12-bit ADC found on the TMS320x280x and TMS320F2801x
devices. Inherent gain and offset errors affect the absolute accuracy of the ADC. The
90 Device Support Copyright © 2003–2009, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015