Texas Instruments TMS320F2802 Stereo System User Manual


 
INT12
MUX
INT11
INT2
INT1
CPU
(Enable)(Flag)
INTx
INTx.8
PIEIERx(8:1) PIEIFRx(8:1)
MUX
INTx.7
INTx.6
INTx.5
INTx.4
INTx.3
INTx.2
INTx.1
From
Peripherals or
External
Interrupts
(Enable) (Flag)
IER(12:1)IFR(12:1)
Global
Enable
INTM
1
0
PIEACKx
(Enable/Flag)
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230L–OCTOBER 2003–REVISED DECEMBER 2009
www.ti.com
Figure 3-8. Multiplexing of Interrupts Using the PIE Block
Table 3-12. PIE Peripheral Interrupts
(1)
PIE INTERRUPTS
CPU
INTERRUPTS
INTx.8 INTx.7 INTx.6 INTx.5 INTx.4 INTx.3 INTx.2 INTx.1
WAKEINT TINT0 ADCINT SEQ2INT SEQ1INT
INT1 XINT2 XINT1 Reserved
(LPM/WD) (TIMER 0) (ADC) (ADC) (ADC)
EPWM6_TZINT EPWM5_TZINT EPWM4_TZINT EPWM3_TZINT EPWM2_TZINT EPWM1_TZINT
INT2 Reserved Reserved
(ePWM6) (ePWM5) (ePWM4) (ePWM3) (ePWM2) (ePWM1)
EPWM6_INT EPWM5_INT EPWM4_INT EPWM3_INT EPWM2_INT EPWM1_INT
INT3 Reserved Reserved
(ePWM6) (ePWM5) (ePWM4) (ePWM3) (ePWM2) (ePWM1)
ECAP4_INT ECAP3_INT ECAP2_INT ECAP1_INT
INT4 Reserved Reserved Reserved Reserved
(eCAP4) (eCAP3) (eCAP2) (eCAP1)
EQEP2_INT EQEP1_INT
INT5 Reserved Reserved Reserved Reserved Reserved Reserved
(eQEP2) (eQEP1)
SPITXINTD SPIRXINTD SPITXINTC SPIRXINTC SPITXINTB SPIRXINTB SPITXINTA SPIRXINTA
INT6
(SPI-D) (SPI-D) (SPI-C) (SPI-C) (SPI-B) (SPI-B) (SPI-A) (SPI-A)
INT7 Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved
I2CINT2A I2CINT1A
INT8 Reserved Reserved Reserved Reserved Reserved Reserved
(I2C-A) (I2C-A)
ECAN1_INTB ECAN0_INTB ECAN1_INTA ECAN0_INTA SCITXINTB SCIRXINTB SCITXINTA SCIRXINTA
INT9
(CAN-B) (CAN-B) (CAN-A) (CAN-A) (SCI-B) (SCI-B) (SCI-A) (SCI-A)
INT10 Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved
INT11 Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved
INT12 Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved
(1) Out of the 96 possible interrupts, 43 interrupts are currently used. The remaining interrupts are reserved for future devices. These
interrupts can be used as software interrupts if they are enabled at the PIEIFRx level, provided none of the interrupts within the group is
being used by a peripheral. Otherwise, interrupts coming in from peripherals may be lost by accidentally clearing their flag while
modifying the PIEIFR. To summarize, there are two safe cases when the reserved interrupts could be used as software interrupts:
1) No peripheral within the group is asserting interrupts.
2) No peripheral interrupts are assigned to the group (example PIE group 12).
44 Functional Overview Copyright © 2003–2009, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015