Filter
Top Products
Technical Specification
32
High pass filter
Types available Butterworth (6dB/Oct, 12dB/Oct, 18dB/Oct, 24dB/Oct, 36dB/Oct, 48dB/Oct)
Linkwitz-Riley (12dB/Oct, 24dB/Oct)
Bessel (12dB/Oct, 18dB/Oct, 24dB/Oct, 36dB/Oct, 48dB/Oct)
12dB/Oct Peaking
24dB/Oct Peaking
Freq. Range: 20Hz to 15kHz in 21 steps/octave
Peaking Filter Boost: 0dB to +6dB in 0.1dB steps.
Low pass filter
Types available Butterworth (6dB/Oct, 12dB/Oct, 18dB/Oct, 24dB/Oct, 36dB/Oct, 48dB/Oct)
Linkwitz-Riley (12dB/Oct, 24dB/Oct)
Bessel (12dB/Oct, 18dB/Oct, 24dB/Oct, 36dB/Oct, 48dB/Oct)
Freq. Range: 50Hz to 20kHz in 21 steps/octave
Parametric EQ 1 –6
Frequency range: 20Hz to 20kHz in 21 steps per octave
Boost/cut: +12/-12dB in 0.1dB steps
PEQ Bandwidth: 3.0 to 0.08
Low/High shelf filter
Frequency range: 20Hz to 20kHz in 21 steps per octave
Boost/cut: +12/-12dB in 0.1dB steps
Shelf slope: 6dB/Oct and 12dB/Oct
Compressor
Threshold: +21dBu to –10dBu in 0.1dB steps
Bypass: Yes/No
Attack: 40ms to 100ms in 20us increments up to 1ms, then in 1ms increments.
Release: 10ms to 2000ms in 10ms increments
Ratio: 1:1 to 5:1 in unit increments
Knee: Hard/Soft
Look-ahead limiter
Threshold: +21dBu to 10dBu in 0.5dB steps
Release: 10ms to 1000ms
Knee: Hard/Soft
Mute On/off (Press output trim)
Power Requirements
Voltage 90 to 250V AC @ 50/60Hz
Consumption < 60 VA
Fuse rating T 800mA, L 250 V
Dimensions & Weight
Width 483mm (19 inch)
Height 44mm (1.75 inch)
Depth 287mm (12 inch)
Nett 4kg
Shipping 6kg
Terminations
Audio inputs/outputs 3-pin XLR
RS-485 inputs/outputs 3-pin XLR
RS-232 8-pin Mini-DIN socket
Power 3-pin IEC