Filter
Top Products
DN9848 Menu System
7
If you prefer to program each parameter in turn across all the input/output channels, you can also
skip across from the current channel to the same page on another input/output channel by pressing
the MENU ACCESS button of the other channel. If you want to jump to the first page of a different
channel, press the HOME button and then the required channel button.
4.2.2 Set Up Menu
Global parameters, such as the Comms Channel for remote control set ups, security options and unit
labelling are defined in the Set Up menu. To switch to the Set Up menu, press and hold the black
HOME (SET UP) button located on the programming panel. Press the button repeatedly to cycle through
the menu pages.
4.2.3 Store and Recall
The Store and Recall menu pages are accessed by the corresponding buttons on the programming
panel. To abort and exit the store/recall menu press the HOME button.
4.2.4 Home Page
The Home page, displayed at the end of the start up routine, indicates the unit name (set by the
User) and the current working memory which was retained from the previous session. To return to
the Home page at any time, press and release the HOME button. (The HOME button is a dual function
button – a short press returns to the Home page while a long press opens the Set Up menu.) The
HOME button can also be pressed to abort a Store or Recall process.