Filter
Top Products
8
In order to make the DN3600 as straightforward to use as a conventional graphic equaliser, the
backlit LCD window provides a ‘virtual’ representation of a conventional graphic equaliser as
well as the settings of the shelving high and low-pass filters and the notch filters. The use of
multi-function buttons for regularly accessed functions has been avoided to enable the unit to be
adjusted quickly and efficiently while the Curve display function provides the user with a
frequency response display based on the combined operation of the graphic, shelving filters,
notch filters and gain.
Installation
The inputs and outputs are electronically fully balanced on XLR connectors and are wired
conventionally with pin 1 as ground. Because the system is fully floating, either pin 2 or pin 3
can be designated as hot so long as the same protocol is adhered to for both the input and the
output connectors.
The DN3600 is designed for use in both fixed and mobile installations where it can be mounted
in a conventional 19 inch rack occupying just 2U of height. In mobile situations where rough
handling is a possibility, it is advisable to support the rear of the unit to prevent undue stress being
placed on the front panel. Ensure that the unit has sufficient ventilation and that it is not placed
directly over any device which runs hot such as a power amplifier or console power supply.