Filter
Top Products
21
More EQ
Soft key 1 is accompanied by the text More EQ. Pressing this key selects the More EQ menu
and the Filter Adjust display. See below. The More EQ menu text will be highlighted if the More
EQ filters for the selected channel are in circuit.
A : B : Link
Soft key 2 is accompanied by the text A : B : Link. Pressing this key toggles between addressing
channels A and B. If the key is held for more than 1 second, the Link mode is selected. In Link
mode, all fader adjustments affect both channels. If Link mode is entered from channel A,
channel A is displayed and channel B follows it. If Link mode is entered from channel B, channel
B is displayed, and channel A follows. The A : B : Link status is shown at the top of the screen
as =A=, =B=, A+B or B+A.
Utilities
Soft key 3 is accompanied by the text Utilities. Pressing this key selects the Utilities menu. See
below.
Bypass and Reset
Soft key 4 is accompanied by the text Bypass. Pressing this key engages a bypass of the graphic
equaliser section. The Gain control and More EQ filters and Notches remain in circuit. If the
Bypass key is held pressed for more than 5 seconds, all the graphic faders of the addressed
channel are reset to the 0dB position.