Filter
Top Products
23
Filter Adjust Menu and Display.
Access by pressing the More EQ key followed by the Filters key.
Soft key options: Notch 1
Notch 2
Back
Display
In Filter adjust mode, the display shows the frequency response curve calculated from the Notch
filter and High Pass and Low Pass filter settings.
CURVE/FADER
When the CURVE/FADER key is pressed, the display incorporates the graphic fader positions
into the calculated frequency response curve.
Notch 1
Soft key 1 is accompanied by the text Notch 1. When pressed and highlighted, the key selects
Notch 1 for adjustment. The Notch filter frequency is set by use of the Frequency keys (1/
3 octave ISO frequencies) or by the FREQ rotary control (1/12 octave steps). When linked the
new frequency setting of the displayed channel is copied to the alternate channel. Notch
frequency is shown as text at the top of the screen.
Notch filter depth is adjusted by the LEVEL rotary control over a range of 0 to -12dB in 1dB
steps. When linked, the settings of the two channels are incrementally linked i.e. the settings of
both channels are increased or decreased by 1dB per click of the rotary control. Notch depth is
shown as text at the top of the screen.
Notch 2
Soft key 2 is accompanied by the text Notch 2. When pressed and highlighted, the key selects
Notch 2 for adjustment. The Notch filter frequency is set by use of the Frequency keys (1/3 octave
ISO frequencies) or by the FREQ rotary control (1/12 octave steps). When linked, the new
frequency setting of the displayed channel is copied to the alternate channel. Notch frequency
is shown as text at the top of the screen.
Notch filter depth is adjusted by the LEVEL rotary control over a range of 0 to -12dB in 1dB
steps. When linked the, the settings of the two channels are incrementally linked i.e. the settings
of both channels are increased or decreased by 1dB per click of the rotary control. Notch depth
is shown as text at the top of the screen.
Soft key 3 is accompanied by the text . When pressed and highlighted this key selects
the High and Low pass filters for adjustment. The High pass filter frequency is set by the
frequency keys or by the FREQ rotary control. The Low pass filter frequency is set by the
frequency keys or by the LEVEL rotary control. When linked, the setting of the currently