Filter
Top Products
18
TASCAM BB-1000CD/BB-800
NOTE
In addition to during recording, this unit also writes
information to the SD card when editing and setting
marks, for example. When the write protection is
engaged, this information cannot be written. Disengage
the write-protect switch to enable these functions.
Inserting and removing SD cards
Inserting SD cards
ª
Push an SD card in until it clicks fully into place.
Removing SD cards
ª
Press the inserted card in slightly to make it eject.
NOTE
Do not remove the SD card during recording or
playback, or while the SD indicator is flashing (writing
data).
Formatting an SD card
To use a new SD card or a card that has been formatted for
another device or by a computer, we recommend that you
format the card with this unit. Using an SD card formatted
on another device or a computer could cause recording
errors.
CAUTION
• Beware that formatting erases all the data on an SD
card, including data written by other equipment.
3 – Preparation
• When formatting, use the AC adaptor or batteries that
have sufficient remaining charge. If the power turns OFF
during formatting, formatting could fail.
1 Insert the SD card.
2 Press the HOME key to open the Home screen.
3 Press the SD key (BB-1000CD only). The indicator
above and to the left of the SD key lights.
4 Press the MENU key to open the MENU screen.
5 Use the DATA wheel or CURSOR [§/¶] keys to select
MEDIA, and press the ENTER key.
The MEDIA SD screen opens.
6 Use the DATA wheel or CURSOR [§/¶] keys to select
FORMAT, and press the ENTER key.
7 The following confirmation screen appears. Press
the F1 key to start formatting. When formatting
completes, the MEDIA SD screen reopens.