Filter
Top Products
54
GB
3) Input shorted and sealed at VOL MAX.
4) Weighted network + 20 kHz LPF, input level.
Inputs (Digital)
Outputs
EQUALIZER
Video section
Inputs/Outputs
Video: 1 Vp-p, 75 ohms
S-video: Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
COMPONENT VIDEO:Y: 1 Vp-p, 75 ohms
P
B
/C
B
/B-Y: 0.7 Vp-p, 75
ohms
P
R
/C
R
/R-Y: 0.7 Vp-p, 75
ohms
80 MHz HD Pass Through
i.LINK section
Pin 4 pins
Transmission speed S200 (Maximum data
transmission speed 200
Mbps)
Transmission protocol A/M transmission protocol
Format (input) Super Audio CD* (DSD
PLAIN)
2 channel linear PCM (IEC-
60958-3)
Sampling frequency: 44.1
kHz
* Conforms to the copy protection technology of
DTLA (Revision 1.2).
General
Power requirements
Power consumption 600 W
Power consumption (during standby mode)
1 W
AC outlets
Dimensions 430 × 238 × 480 mm
including projecting parts and
controls
Mass (Approx.) 28.5 kg
Supplied accessories
AC power coad (1)
Easy Setup Guide (1)
Remote commander RM-LJ312 (1)
Operating Instructions for RM-LJ312 (1)
R6 (size-AA) batteries (3)
Design and specifications are subject to change
without notice.
CD/SACD, TAPE,
MD/DAT, DVD, LD,
TV/SAT, VIDEO 1, 2,
3, 4, 5
Sensitivity: 170 mV
Impedance: 50 kilohms
S/N
3)
: 100 dB (A, 2V
4)
)
CD/SACD, DVD, LD,
VIDEO 1, TV/SAT
(Coaxial)
Impedance: 75 ohms
S/N: 100 dB
(A Network, 20 kHz LPF)
CD/SACD, DVD, LD,
TV/SAT, MD/DAT,
VIDEO1, 3 (Optical)
S/N: 100 dB
(A Network, 20 kHz LPF)
TAPE, MD/DAT
(REC OUT), VIDEO
1, 2, 3 (AUDIO OUT)
Voltage: 170 mV
Impedance: 2.2 kilohms
FRONT L/R,
CENTER,
SURROUND L/R,
SURROUND BACK
L/R, SUB WOOFER
Voltage: 2 V
Impedance: 220 ohms
Gain levels ±10 dB, 1 dB step
Area code Power requirements
CEL 230 V AC, 50/60 Hz
TW 110 V AC, 60 Hz
KR 220 V AC, 60 Hz
Area code AC outlets
CEL 1 switched, 100 W MAX
TW, KR – (no AC outlet)
For details on the area code of the component you
are using, see page 2.