Filter
Top Products
Getting Started
15
GB
Tip (Models of area code U, CA only)
To connect certain speakers to another power amplifier, use the PRE OUT jacks. The same signal is output from both
the SPEAKERS FRONT jacks and the PRE OUT jacks. For example, if you want to connect just the front speakers
to another amplifier, connect that amplifier to the PRE OUT FRONT L and R jacks.
Enjoying the 9.1 channel speaker system
What is the 9.1 channel speaker system?
A large dubbing theater for recording movie soundtracks uses 10 surround speakers. However, in a
small dubbing theater, only 2 speakers each are placed on the right, left, and back walls. Thus, the
minimum setup for a dubbing theater is 9.1 channels. When SPEAKERS SURROUND is set to A+B,
you can enjoy 9.1 channel speaker operation, just like a dubbing theater.
Arrange the speakers around the center
of the room based on the angles shown
in the illustration on the left. If you are
unable to position the speakers
according to the angles shown, place
one set of surround speakers slightly
forward of the listening position
(toward the front speakers).
Although the center of the room is used
as an axis for determining speaker
placement, 9.1 channel speaker
operation covers an extremely wide
listening area which you can enjoy
from anywhere in the room behind the
central point.
When using the CINEMA STUDIO EX modes with the 9.1 channel system, be sure to set Virtual
Speaker to OFF in SURR SET UP. (You can enjoy the surround effects of movies even without the use
of virtual speakers since so many real speakers are used.)
In addition, unlike virtual speakers, the expressive capability of real speakers will vary depending on
the speaker. Adjust the effect level so that the actor’s lines sound natural and the impact of sound effects
is nicely balanced.
The advantage of a 9.1 channel speaker system is a drastic improvement in the connection between the
front (video) sound field and the surround sound field. Previously, we have employed virtual speaker
technology to present this sound effect, but a real 9.1 channel multi channel surround system has a
much wider effect area so that all family members can enjoy the surround effect. Of course, when
seated in the middle of the listening position, you can enjoy the sound exactly as the movie director
listened.
Tips for placing speakers
Place surround speakers B between the front speakers and the listening position. Adjusting the position of these
speakers improves the connection between the front and surround sound stage.
continued