Filter
Top Products
44
GB
You can enter a name of up to 8 characters for
inputs selected with INPUT SELECTOR, and
display it in the amplifier’s display.
1 Rotate INPUT SELECTOR to select an
input you want to create an index name
for.
2 Rotate MAIN MENU to select
“CUSTOMIZE”.
3 Rotate MENU to select “NAME IN?”.
4 Press ENTER or rotate –/+.
The cursor flashes and you can select a
character.
5 Use MENU and –/+ to create an index
name.
Rotate –/+ to select a character, then rotate
MENU to move the cursor to the next
position.
Tips
• You can select the character type as follows by
rotating –/+.
Alphabet (upper case) t Numbers t Symbols
• To enter a blank space, rotate –/+ until a blank
space appears in the display.
• If you make a mistake, rotate MENU until the
character you want to change flashes, then rotate
–/+ to select the correct character.
6 Press ENTER.
The entered name is registered.
7 To index other inputs, repeat steps 1 to
6.
You can set the amplifier to turn off
automatically at a specified time.
Press SLEEP repeatedly while the power is
on.
Each time you select or press SLEEP, the
display changes cyclically as follows:
2:00:00 t 1:30:00 t 1:00:00 t 0:30:00 t
OFF
While using Sleep Timer, “SLEEP” lights up in
the display.
Tip
To check the remaining time before the amplifier turns
off, press SLEEP while the power is on. The remaining
time appears in the display.
Other Operations
Naming inputs
Using the Sleep Timer