Filter
Top Products
40
GB
All SURR SET UP menu
parameters
* Adjustable only when “MENU EXPAND” is set to
“ON”.
x C. WIDTH L_C_R
(Center width control)
Initial setting: (3)
Lets you perform further adjustments for Dolby Pro
Logic II Music mode decoding. You can set this
parameter only when A.F.D. mode is set to “PRO
LOGIC II MUSIC” (page 26).
You can adjust the distribution of the center channel
signal, generated through the Dolby Pro Logic II
decoding, to the L/R speakers.
x DIMENSION F_I_S
(Dimension control)
Initial setting: midpoint (0)
Lets you perform further adjustments for Dolby Pro
Logic II Music mode decoding. You can set this
parameter only when A.F.D. mode is set to “PRO
LOGIC II MUSIC” (page 26).
You can adjust the difference between the front
channels and the surround channels.
x PANORAMA MODE
(Panorama mode)
Lets you perform further adjustments for Dolby Pro
Logic II Music mode decoding. You can set this
parameter only when A.F.D. mode is set to “PRO
LOGIC II MUSIC” (page 26).
•ON
Lets you enjoy the surround sound by spreading the
sound field of front speakers to the left and right of
the listening position (panorama mode).
•OFF
Panorama mode is not activated.
x FRONT REVERB (Front reverberation)
This parameter is especially for “D.CONCERT HALL
A/B” (page 28). This parameter lets you adjust the
amount of reverberations to add to the front signals
according to the original reverberations in the source.
•STD
Normally, select “STD”.
•WET
Select to increase front reverberations.
x SCREEN DEPTH (Screen depth)
Lets you create the sensation that the sound of the front
speakers comes from inside the screen in your listening
room, like theatres.
•ON
Lets you create the sensation that the sound comes
from a very large screen with a great amount of
screen depth.
•OFF
This function is not activated.
x VIR.SPEAKERS (Virtual speakers)
This parameter is especially for the Cinema Studio EX
modes (page 27).
•ON
The virtual speakers are created.
•OFF
The virtual speakers are not created.
Note
The setting of “SCREEN DEPTH” and
“VIR.SPEAKERS” are not linked with sound fields.
x A.F.D. 2CH SW
(Creating, low frequency signals)
•CREATE
Lets you create low frequency signals for output to
the subwoofer when “A.F.D. AUTO” is selected.
•OFF
Low frequency signals are not created.
Advanced LEVEL menu
parameters
When “MENU EXPAND” is set to “ON”, all of
the following parameters are displayed and
adjustable.
See page 33 for the LEVEL menu adjustments.
Initial settings are underlined.
EFFECT LEVEL
C. WIDTH L_C_R*
DIMENSION F_I_S*
PANORAMA MODE*
FRONT REVERB*
SCREEN DEPTH*
VIR.SPEAKERS*
A.F.D. 2CH SW*