Filter
Top Products
Getting Started
5
GB
Required cords
The hookup diagrams on the subsequent pages assume the use of the following optional connection
cords (A to I) (not supplied).
A Audio cord
White (L)
Red (R)
B Audio/video cord
Yellow (video)
White (L/audio)
Red (R/audio)
C Video cord
Yellow
D S-video cord
E Optical digital cord
F Coaxial digital cord
G Monaural audio cord
Black
Tip
Audio cord A can be torn into two monaural audio
cords G.
H Component video cord
Green
Blue
Red
I i.LINK cable
Notes
• Turn off the power to all components before making any connections.
• Be sure to make connections firmly to avoid hum and noise.
• When connecting an audio/video cord, be sure to match the color-coded pins to the appropriate jacks on the
components: yellow (video) to yellow; white (left, audio) to white; and red (right, audio) to red.
• When connecting optical digital cords, insert the cord plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
If you have Sony components with CONTROL A1II/CONTROL S
jacks
See “CONTROL A1II Control System” on page 48.
If you have Sony component (SCD-XA9000ES) with i.LINK jacks
Use the i.LINK cable (I) supplied with SCD-XA9000ES. For details, refer to the Operating
Instructions supplied with SCD-XA9000ES.
See also “i.LINK connection” on page 49.