Filter
Top Products
Getting Started
17
GB
Connect the supplied AC power cord to the AC
IN terminal on the amplifier, then connect the
AC power cord to a wall outlet.
* The configuration, shape, and number of AC outlets
vary according to the area code.
Notes
• The AC OUTLET(s) on the rear of the amplifier is a
switched outlet, which supplies power to the
connected component only while the amplifier is
turned on.
• Make sure that the total power consumption of the
component(s) connected to the amplifier’s AC
OUTLET(s) does not exceed the wattage stated on
the rear panel. Do not connect high-wattage
electrical home appliances such as electric irons,
fans, or TVs to this outlet. This may cause a
malfunction.
Performing initial setup
operations
Before using the amplifier for the first time,
initialize the amplifier by performing the
following procedure.
This procedure can also be used to return
settings you have made to their factory defaults.
1 Press ?/1 to turn off the amplifier.
2 Hold down ?/1 for 5 seconds.
“ENTER to Clear ALL” appears in the
display for 10 seconds.
3 Press ENTER while “ENTER to Clear
ALL” appears in the display.
After “MEMORY CLEARING...” appears
in the display for a while, “MEMORY
CLEARED!” appears.
The following are reset to their factory
settings.
• All settings in the SPEAKER SET UP,
LEVEL, SURR SET UP, EQUALIZER,
and CUSTOMIZE menus.
• The sound field memorized for each
input.
• All index names for inputs.
3: Connecting the AC
power cord
A
B
B
A
RL
R
L
SURROUND BACK
SURROUND
FRONT
IMPEDANCE USE 4-16
A+B USE 8-16
CENTER
AC OUTLET
A
B
B
A
R
L
SPEAKERS
AC IN
AC OUTLET
AC IN
terminal
AC power cord