Filter
Top Products
40
Changing the pitch
Other
Functions
This chapter explains other useful
functions that are available on the MD
deck.
Changing the pitch
(Pitch Control Function) (MDS-JE640
only)
You can change the pitch of the MD by lowering the
playback speed. The tone falls at lower pitches.
You can lower the pitch by up to 36 steps
1)
.
1) One octave equals 12 steps.
1
While the deck is playing, press PITCH CONTROL
repeatedly until “Pitch” appears in the display.
2
Turn AMS until the desired step value appears.
To recall the factory setting
Press CLEAR while setting the value.
Notes
•
When you change the step value, the playing sound drops out
momentarily.
•
The step value returns to “0” (factory setting) when you turn
off the deck or eject the MD.
•
When a dot (.) appears to the right of the step value in the pitch
display, this indicates that you have performed fine adjustment
(see page 40) and the pitch value is between steps. (The step
and fine control values are linked.)
You can fine control the playing speed in 0.1% increments
from –87.5% to 0.0%.
1
While the deck is playing, press PITCH CONTROL
repeatedly until “Pfine” appears in the display.
2
Turn AMS (or press ./> repeatedly) until the
desired step value appears.
Setting the pitch automatically in steps
(Auto Step Control Function)
Finely controlling the pitch (Fine Control
Function)
AMS
AMS PITCH CONTROL